Product Description
Product Description
Why choose Xihu (West Lake) Dis.in CS4N compressor ?
1.Cooling effect fan: Fan motor in low speed,20%cooling margin,avoid the high temperature problem.
2.Belt Driven: Optimized design for belt driven.
3.Air/Oil Separator:Larger filtration area,external design,easy for maintenance.
4.PLC Controllerm: Intelligent and smart,with the record remind function,EN/CH 2 language can be chosen.
Atlas-copco group AIR-END
* Higher level configuration
* C43 professional high efficiency air-end
Atlas Copco newly published air-end in 2571, imported from Belgium
Power and efficiency of the air-end improved 9% than old design S40
High efficiency MOTOR
* Higher level configuration
* Higher Protection Level IP54 Motor
Water-proof and dust-proof
More energy-saving(Take CS-7.5N as an example)
High Efficiency & Save Energy
* High efficiency & energy saving intake valve,keep in lower unloading pressure and avoid large energy consumption when unloading.
* New oil tank design,lower pressure drop and less energy consumption.
* Shortest piping system in order to reduce the pressure drop.
* Oversized air/oil separator to bring down the pressure drop.
* Optimized cooler design,less elbow.
| Model | Max Working Pressure | CAPACITY F.A.D | Motor Power | Transmission | Connection | N.W | Dimension (Lx W x H) |
||
| — | bar | psig | m3/min | hp | kw | — | — | kgs | mm |
| CS11N-7 | 7 | 102 | 1.65 | 15 | 11 | Belt Drive | G3/4″ | 230 | 850*650*930 |
| CS11N-8 | 8 | 116 | 1.64 | ||||||
| CS11N-10 | 10 | 145 | 1.35 | ||||||
| CS15N-7 | 7 | 102 | 2.00 | 20 | 15 | Belt Drive | G3/4″ | 230 | 850*650*930 |
| CS15N-8 | 8 | 116 | 2.00 | ||||||
| CS15N-10 | 10 | 145 | 1.80 | ||||||
| CS18.5N-7 | 7 | 102 | 3.00 | 25 | 18.5 | Belt Drive | G1″ | 330 | 710*740*1275 |
| CS18.5N-8 | 8 | 116 | 2.90 | ||||||
| CS18.5N-10 | 10 | 145 | 2.50 | ||||||
| CS22N-7 | 7 | 102 | 3.30 | 30 | 22 | Belt Drive | G1″ | 345 | 710*740*1275 |
| CS22N-8 | 8 | 116 | 3.30 | ||||||
| CS22N-10 | 10 | 145 | 2.80 | ||||||
| CS30N-7 | 7 | 102 | 5.00 | 40 | 30 | Belt Drive | G1″ | 583 | 860*930*1405 |
| CS30N-8 | 8 | 116 | 4.70 | ||||||
| CS30N-10 | 10 | 145 | 3.80 | ||||||
| CS37N-7 | 7 | 102 | 5.80 | 50 | 37 | Belt Drive | G1″ | 524 | 860*930*1405 |
| CS37N-8 | 8 | 116 | 5.70 | ||||||
| CS37N-10 | 10 | 145 | 5.00 | ||||||
| CS45N-7 | 7 | 102 | 7.10 | 60 | 45 | Belt Drive | G1 1/2″ | 650 | 1320*970*1380 |
| CS45N-8 | 8 | 116 | 6.80 | ||||||
| CS45N-10 | 10 | 145 | 6.00 | ||||||
| CS55N-7 | 7 | 102 | 9.40 | 75 | 55 | Belt Drive | RP2″ | 880 | 1320*1160*1720 |
| CS55N-8 | 8 | 116 | 8.90 | ||||||
| CS55N-10 | 10 | 145 | 7.50 | ||||||
| CS75N-7 | 7 | 102 | 13.00 | 100 | 75 | Belt Drive | RP2″ | 1110 | 1575*1160*1720 |
| CS75N-8 | 8 | 116 | 11.60 | ||||||
| CS75N-10 | 10 | 145 | 10.50 | ||||||
FAQ
Q1: Are you a manufacturer or trading company?
A1: Xihu (West Lake) Dis.in is professional screw air compressor factory located in HangZhou, China, CHINAMFG is Xihu (West Lake) Dis.in overseas market sales representative.
Q2: Xihu (West Lake) Dis.in is real member of Atlas-copco group?
A2: Yes, in 2571, Sweden Atlas-copco 100% acquired Xihu (West Lake) Dis.in.
Q3: Xihu (West Lake) Dis.in air-end from Atlas-copco?
A3: Yes, Xihu (West Lake) Dis.in LS/LSV, LOH, LSH and CS series air compressors all use Atlas Copco’s air-end.
Q4: What’s your delivery time?
A4: about 10-20days after you confirm the order, other voltage pls contact with us.
Q5: How long is your air compressor warranty?
A5: One year for the whole machine since leave our factory.
Q6: What’s the payment term?
A6:We accept T/T, LC at sight, Paypal etc.
Also we accept USD, RMB, JPY, EUR, HKD, GBP, CHF, KRW.
Q7: What’s the Min. Order requirement?
A7: 1unit
Q8: What service you can support?
A8: We offer after-sales service, custom service, production view service and one-stop service.
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Type: | Twin-Screw Compressor |
| Samples: |
US$ 5642/Unit
1 Unit(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How Do You Maintain a Gas Air Compressor?
Maintaining a gas air compressor is essential to ensure its optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, extends the compressor’s lifespan, and promotes efficient operation. Here are some key maintenance steps for a gas air compressor:
1. Read the Manual:
Before performing any maintenance tasks, thoroughly read the manufacturer’s manual specific to your gas air compressor model. The manual provides important instructions and guidelines for maintenance procedures, including recommended intervals and specific maintenance requirements.
2. Check and Change the Oil:
Gas air compressors typically require regular oil changes to maintain proper lubrication and prevent excessive wear. Check the oil level regularly and change it according to the manufacturer’s recommendations. Use the recommended grade of oil suitable for your compressor model.
3. Inspect and Replace Air Filters:
Inspect the air filters regularly and clean or replace them as needed. Air filters prevent dust, debris, and contaminants from entering the compressor’s internal components. Clogged or dirty filters can restrict airflow and reduce performance. Follow the manufacturer’s guidelines for filter cleaning or replacement.
4. Drain Moisture from the Tank:
Gas air compressors accumulate moisture in the compressed air, which can lead to corrosion and damage to the tank and internal components. Drain the moisture from the tank regularly to prevent excessive moisture buildup. Refer to the manual for instructions on how to properly drain the moisture.
5. Check and Tighten Connections:
Regularly inspect all connections, fittings, and hoses for any signs of leaks or loose connections. Tighten any loose fittings and repair or replace damaged hoses or connectors. Leaks can lead to reduced performance and inefficiency.
6. Inspect Belts and Pulleys:
If your gas air compressor has belts and pulleys, inspect them for wear, tension, and proper alignment. Replace any worn or damaged belts and ensure proper tension to maintain optimal performance.
7. Clean the Exterior and Cooling Fins:
Keep the exterior of the gas air compressor clean from dirt, dust, and debris. Use a soft cloth or brush to clean the surfaces. Additionally, clean the cooling fins regularly to remove any accumulated debris that can impede airflow and cause overheating.
8. Schedule Professional Servicing:
While regular maintenance can be performed by the user, it is also important to schedule professional servicing at recommended intervals. Professional technicians can perform thorough inspections, conduct more complex maintenance tasks, and identify any potential issues that may require attention.
9. Follow Safety Precautions:
When performing maintenance tasks on a gas air compressor, always follow safety precautions outlined in the manual. This may include wearing protective gear, disconnecting the power source, and ensuring proper ventilation in confined spaces.
By following these maintenance steps and adhering to the manufacturer’s guidelines, you can keep your gas air compressor in optimal condition, prolong its lifespan, and ensure safe and efficient operation.
Can Gas Air Compressors Be Used for Pneumatic Tools?
Yes, gas air compressors can be used for pneumatic tools. Here’s a detailed explanation:
1. Versatile Power Source:
Gas air compressors, powered by gasoline or diesel engines, provide a portable and versatile power source for operating pneumatic tools. They eliminate the need for electrical power supply, making them suitable for remote locations or construction sites where electricity may not be readily available.
2. High Power Output:
Gas air compressors typically offer higher power output compared to electric compressors of similar size. This high power output enables gas compressors to deliver the necessary air pressure and volume required by pneumatic tools, ensuring optimal tool performance.
3. Mobility and Portability:
Gas air compressors are often designed with mobility and portability in mind. They are compact and equipped with wheels or handles, allowing for easy transportation to different job sites. This mobility is advantageous when using pneumatic tools in various locations or when working in confined spaces.
4. Continuous Operation:
Gas air compressors can provide continuous air supply for pneumatic tools without the need for frequent pauses or recharging. As long as there is an adequate fuel supply, gas compressors can operate for extended periods, allowing uninterrupted use of pneumatic tools for tasks such as drilling, nailing, sanding, or painting.
5. Suitable for High-Demand Applications:
Pneumatic tools used in heavy-duty applications often require a robust air supply to meet their performance requirements. Gas air compressors can generate higher air flow rates and maintain higher operating pressures, making them suitable for high-demand pneumatic tools like jackhammers, impact wrenches, or sandblasters.
6. Flexibility in Compressor Size:
Gas air compressors are available in various sizes and capacities, allowing users to choose the compressor that best matches the air demands of their pneumatic tools. From small portable compressors for light-duty tasks to larger industrial-grade compressors for heavy-duty applications, there is a wide range of options to suit different tool requirements.
7. Reduced Dependency on Electrical Infrastructure:
Using gas air compressors for pneumatic tools reduces reliance on electrical infrastructure. In situations where the electrical power supply is limited, unreliable, or expensive, gas compressors offer a viable alternative, ensuring consistent tool performance without concerns about power availability.
It’s important to note that gas air compressors emit exhaust gases during operation, so proper ventilation is necessary when using them in enclosed spaces to ensure the safety of workers.
In summary, gas air compressors can effectively power pneumatic tools, offering mobility, high power output, continuous operation, and suitability for various applications. They provide a reliable and portable solution for utilizing pneumatic tools in locations where electrical power supply may be limited or unavailable.
What Are the Primary Applications of Gas Air Compressors?
Gas air compressors have a wide range of applications across various industries and activities. These compressors, powered by gas engines, provide a portable and versatile source of compressed air. Here’s a detailed explanation of the primary applications of gas air compressors:
1. Construction Industry:
Gas air compressors are extensively used in the construction industry. They power a variety of pneumatic tools and equipment, such as jackhammers, nail guns, impact wrenches, and concrete breakers. The portable nature of gas air compressors makes them ideal for construction sites where electricity may not be readily available or practical to use.
2. Agriculture and Farming:
Gas air compressors find applications in the agricultural sector. They are used to operate air-powered machinery and tools, including pneumatic seeders, sprayers, and agricultural pumps. Gas air compressors provide the necessary power to carry out tasks such as crop seeding, irrigation, and pest control in agricultural settings.
3. Recreational Activities:
Gas air compressors are commonly utilized in recreational activities. They are used to inflate tires, sports balls, inflatable structures, and recreational equipment such as air mattresses, rafts, and inflatable toys. Gas air compressors provide a convenient and portable solution for inflating various recreational items in outdoor settings.
4. Mobile Service Operations:
Gas air compressors are employed in mobile service operations, such as mobile mechanics, tire service providers, and mobile equipment repair services. These compressors power air tools and equipment required for on-site repairs, maintenance, and servicing of vehicles, machinery, and equipment. The mobility of gas air compressors allows service providers to bring their tools and compressed air source directly to the location of the service requirement.
5. Remote Job Sites:
Gas air compressors are well-suited for remote job sites or locations without access to electricity. They are commonly used in industries such as mining, oil and gas exploration, and remote construction projects. Gas air compressors power pneumatic tools, machinery, and drilling equipment in these environments, providing a reliable source of compressed air for operational needs.
6. Emergency and Backup Power:
In emergency situations or during power outages, gas air compressors can serve as a backup power source. They can power essential equipment and systems that rely on compressed air, such as emergency lighting, communication devices, medical equipment, and backup generators. Gas air compressors provide a reliable alternative power solution when electrical power is unavailable or unreliable.
7. Sandblasting and Surface Preparation:
Gas air compressors are used in sandblasting and surface preparation applications. They provide the high-pressure air necessary for propelling abrasive media, such as sand or grit, to remove paint, rust, or other coatings from surfaces. Gas air compressors offer the power and portability required for sandblasting operations in various industries, including automotive, metal fabrication, and industrial maintenance.
8. Off-Road and Outdoor Equipment:
Gas air compressors are commonly integrated into off-road and outdoor equipment, such as off-road vehicles, utility trucks, and recreational vehicles. They power air-operated systems, including air suspension systems, air brakes, air lockers, and air horns. Gas air compressors provide the necessary compressed air for reliable and efficient operation of these systems in rugged and outdoor environments.
Overall, gas air compressors have diverse applications in construction, agriculture, recreational activities, mobile service operations, remote job sites, emergency power backup, sandblasting, and various off-road and outdoor equipment. Their portability, versatility, and reliable power supply make them indispensable tools in numerous industries and activities.
editor by CX 2023-09-27
China OEM Best Price Air Compressor Machine Dental Oil Free Silent Air Compressor manufacturer
Product Description
Advantages and characteristics:
1. Ultra quiet: The sound of the air compressor is low when it works, and it can meet the requirements of indoor use, such as research institutes, laboratories, hospitals, offices, students’ classrooms, families and other environments.
2. Super clean: The machine is pure oil free design, oil free lubrication piston system, high efficiency, small loss, clean
exhaust gas, to meet the needs of supporting equipment, to ensure the safety of operators, more response to the global call of “green environmental protection”.
3. Low energy consumption: the pressure and gas production ratio are set at the CZPT ratio. Under the condition of less energy consumption, more gas source can be produced more quickly.
4. Core technology: Cylinder liner system adopts nano coating technology, abandon inferior oil free material, more quiet, cleaner, longer life, adapt to higher requirements of the field.
5. Drying and sterilizing: according to the needs of different industries can be selected with different precision requirements of the filter, to ensure the use of results as the guidance, to promote user satisfaction.
6. Anti-rust spraying: the interior of the gas storage tank is sprayed to ensure gas cleanliness and product safety at the source.
7. Easy operation: electricity use, automatic design, work without special duty;Air pressure can be adjusted freely in the interval according to the requirements of use, without complicated maintenance, only need regular drainage.
8. Fashion and practical: the appearance design of air compressor is fashionable, the performance is practical, and the operation according to the standard can better extend the working life of the product.
|
Power: |
8000 w |
|
Displacement |
1650L/min |
|
Maximum pressure |
8bar |
|
Gas storage tank |
240L |
|
Noise |
55 db |
|
Size |
115 * 55 * 81 cm |
|
Net weight |
116 kg |
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Principle: | Reciprocating Compressor |
| Application: | Medical |
| Performance: | Low Noise |
| Mute: | Mute |
| Customization: |
Available
|
|
|---|
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by CX 2023-04-18
China manufacturer Industrial Compressors Type Oil Free Air Compressor Machine Prices air compressor for sale
Error:获取返回内容失败，
Your session has expired. Please reauthenticate.
| Warranty: | 1 Year |
|---|---|
| Lubrication Style: | Lubricated |
| Product Name: | Air Compressor |
| Power: | 6HP |
| Capacity: | 800L/Min |
| Speed: | 1400 R/Min |
| Customization: |
Available
|
|
|---|
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by CX 2023-04-13
China wholesaler 11 Kw 15kw Factory Direct Sell Good in Quality Laser Air Compressor for Laser Cutting Machine near me manufacturer
Item Description
4 in 1 collection Screw Air Compressor capability is big. Its displacement is significantly greater than that of ordinary piston compressors. In the other palms, the 4 in 1 sequence Screw Air Compressor is much more power-preserving .4 in 1 collection Screw Air Compressor is effortless to function,24 hours unattended function,Conserve labour, preserve room,lengthen the serve time, at the very same time, will not minimize productiveness performance.
* CZPT AA grade airend is adopted, be designed with 4 bearings in entrance and 4 in again, running efficiently and reliably with 8 bearings, cutting much more efficiently and cutting surface area much more amount.
* No installation / Power-and-go / Straightforward routine maintenance / Adjustable stress
FAQ
Q1: Are you manufacturing unit or trade company?
A1: We are manufacturing unit.
Q2: What the specifically address of your manufacturing unit?
A2: Shimi Industrial Street, Xiuli Highway, Xihu (West Lake) Dis. Town, Xihu (West Lake) Dis. County, HangZhou Town, ZheJiang Province
Q3: Guarantee conditions of your air compressor machine?
A3: A single year warranty for the equipment and complex assistance according to your demands.
Q4: Will you provide some spare parts of the air compressor?
A4: We provide all types of goods related to air compressor. (Air dryer, Air tank, etc)
Q5: How extended will you consider to arrange generation?
A5: 380V 50HZ we can shipping and delivery the products inside 10 times. Other electrical energy or other shade we will shipping in 22 days
Q6: Can you accept OEM orders?
A6: Yes,OEM orders are our largely support.
A Buyer’s Manual to Air Compressor Types
There are numerous kinds of Air Compressors, and it truly is critical to understand what every type has to offer you. In this article, we’ll talk about solitary stage air compressors, reduced-noise compressors, and types with two pistons. But, before you get an Air Compressor, be sure to read our buyer’s guide to the different types. This way, you will have all of the information you require to make the proper selection for your company.
Solitary-stage air compressors
A solitary-phase air compressor is an exceptional selection for most common-function functions. They offer enough electricity to function pneumatic resources, and they create considerably less warmth. Single-phase air compressors, nevertheless, are not ideal for weighty-obligation industrial makes use of. Nonetheless, they can be utilised in a variety of purposes, such as automobile shops, gasoline stations, and a variety of production facilities. They are also appropriate for borewells and other high-force locations.
These air compressors are a wonderful choice for home use and are suited for modest-scale firms, contractors, and modest shops. These compressors have ongoing obligation cycles, cast iron compressor pumps, and a least 5,000-hour pump daily life. They also feature sophisticated characteristics, like ODP motors, Car Commence & Controls, Receiver tanks, and electricity cords. They have minimal servicing and can save you a great deal of cash.
Single-phase air compressors are normally less pricey and lighter than their two-phase counterparts. Solitary-stage air compressors are also a lot more portable, which is a furthermore for little initiatives. Even though two-phase compressors provide greater CFM, they are a lot more strong and bulky, generating them unsuitable for modest or home use. So it is important to decide what you will use the air compressor for and choose on a model dependent on your needs.
A one-stage air compressor is made of a piston and a tank. The piston moves quickly inside the cylinder and exerts strain on the cylinder. This implies that the piston are unable to go any faster than the air strain outdoors the cylinder. The piston is created to run in the exact same way for every stage. This is a fantastic decision for home outlets and a single-gentleman automotive outlets, as it enables you to control the pressure with out sacrificing the pump’s daily life.
One-stage air compressors are typically less expensive than two-phase variations, but they are not the greatest option for each software. If you are only making use of your air compressor from time to time, you’ll discover a one-phase design to be much far more reputable than a two-phase design. The principal difference between the two kinds of compressors is in the volume of air that every single phase compresses. A two-phase air compressor will have more air storage capability, but it will nonetheless make much more pressure.
Rotary vane compressors
Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which virtually touches the vane. As the rotor turns, the air that enters the pump is trapped in between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small items of carbon fiber or graphite composite. Vanes could be made of different resources dependent on the software.
Even though rotary vane pumps are not commonly employed to produce compressed air, they are broadly used in automotive and hydraulic programs. Odds are, you have utilised a rotary vane pump at some level in your lifestyle. These pumps are also frequent in the vacuum and compressed air industries. As a consequence, a lot of people do not understand that they are even now around. They characteristic slots that let the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside of. The rotor is eccentrically positioned and has slots and grooves on its surface area. Its inlet and outlet ports are located off-center, allowing the vanes to be pushed out by centrifugal power. Simply because the rotor rotates so rapidly, air is trapped between the vanes. This air then turns into pressurized by the rotating rotor.
Rotating vane compressors can be effortlessly serviced and fixed. A simple alternative of carbon vanes demands just 15 minutes and frequent resources. The carbon vanes usually final nine to eighteen months, relying on technique operating stress. Just before purchasing a rotary vane compressor, make confident to verify regardless of whether it has been appropriately functionality-tested and has a warranty. Typically, warranties include the rotor/stator chambers but do not cover the vanes or air filters. You need to also verify if the unit is protected by a lightning or water damage warranty.
Rotary vane compressors are an integral element of manufacturing industries. Numerous pharmaceutical manufacturing facilities rely on rotary vane compressors to management their equipment. Other industries that use rotary vane compressors consist of the plastics, woodworking, all-natural gasoline, and health care & dental fields. Their advantages are numerous and considerably outweigh any drawbacks of rotary screw compressors. For case in point, a rotary vane compressor can double the daily life of a standard compressor.
Rotary vane compressors with lower-sounds versions
If you are looking for a rotary vane air compressor, you have arrive to the right place. Champion’s LV Sequence rotary vane compressors offer you reduced-sounds models, compact size, and strong integration. In addition to their lower-noise characteristics, they function large filter programs to deliver substantial-good quality compressed air. The LV Series versions also attribute Champion’s reputation for reliability and high quality.
This variety of compressor uses centrifugal force to function and is limited in its leading and bare minimum operating speeds. They are only a 3rd as strong as screw compressors, and their best speed boundaries are considerably reduced. In addition, the vanes put on out effortlessly at substantial speeds since there is not ample centrifugal power to seal them against the cylinder’s edges. Even at 50 percent their full ability, they consume as significantly as eighty% of their complete power ranking.
Because piston compressors make a good deal of sound, manufacturing unit proprietors and store house owners have started to set up sound-dampening cabinets and other answers. But, rotary vane compressors create significantly significantly less sounds than a classic vacuum, and the routine maintenance costs are also low. Rotary vane compressors are also very useful in many industries. They are utilized in the automotive and car finishing industries, as nicely as in dairy industries and milking devices.
If you have a deep pond, a rotary vane air compressor kit can pump up to twenty feet of drinking water. This is much more than sufficient airflow for two to five diffusers. A 1/4 HP rotary vane package pumps around 4.2 CFM. It also assists to boost circulation and oxygen levels in the pond. Finally, a 1/4 HP package delivers the necessary electrical power to thoroughly clean up the bottom of a pond.
The rotary vane and rotary screw are the most well-known air compressors nowadays. Whilst they are equivalent in many techniques, they are more adaptable and durable than their counterparts. They use fewer angular speak to ball bearings and call for less recurrent routine maintenance than piston air compressors. When compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are significantly less costly.
Rotary vane compressors with two pistons
The rotary vane and rotary screw compressors are similar in application, but equally have different advantages and drawbacks. This article will evaluate the benefits of each and emphasize the variations among them. Whilst each are commonly utilised in industrial purposes, rotary vane compressors are desired by numerous industries. These compressors also have a broad selection of employs, ranging from automotive air tool procedure to milking machines. These compressors also have the edge of currently being quieter than piston-powered ones.
The existing common rail position could not be suitable for force swirl injectors, but new positions have been analyzed and present advancements in certain strength values. Furthermore, the recent situation is not necessary for external oil pumps. Nevertheless, mass induction and expulsion have to be performed with utmost treatment. This article focuses on the style and efficiency of rotary vane compressors. You can locate more data about this new layout in the references mentioned under.
The rewards of this variety of compressor are its low price, compact size, and simple maintenance. Hence, they are chosen in reduced ability apps. Additionally, they function built-in vanes. The rotating vanes near the air gap and compress air toward the outlet. In comparison to piston-driven compressors, these models are less expensive and far more reputable. Consequently, you should choose one with the cheapest cost tag. You can also choose for rotary vane compressors that are oil-free of charge.
Sliding vane compressors are an additional common variant. They have a solitary cylinder linked to the compressor and are capable of working at lower speeds. This design also reduces the volume of friction and maintains volumetric effectiveness. However, the sliding vane compressors experience from large frictional losses. If you are seeking for a much more efficient rotary compressor, this is the ideal option. Whilst sliding vane compressors have been in the spotlight for above a century, they are nonetheless fairly youthful.
These compressors are simple to put in and keep. They are also quieter than piston compressors. They are also less expensive than piston-driven compressors. The strength efficiency and lower price make them the ideal decision for any industrial or industrial application. If you’re seeking for a little, compact compressor, the rotary vane has been proven to be the ideal decision for your wants. You should know that it has a lengthy services daily life.