Product Description
Product details
Parameter
| MODEL | MAXIMUM WORKING PRESSURE | FREE AIR DELIVERY* OF UNIT AT WORKING PRESSURE | MOTOR | NOISE LEVEL** | AIR OUTLET DISCHARGE SIZE | WEIGHT | DIMENSIONS | ||||
| Bar | PSI | l/s | m3/min | CFM | kW | HP | dBA | KG | L X W X H (mm) |
||
| MCS-11D5 | 5 | 73 | 40 | 2.40 | 86 | 11 | 15 | 68±2 | G1 | 510 | 1380 x 850 x 1150 |
| MCS-15D5 | 5 | 73 | 50 | 3.00 | 107 | 15 | 20 | 68±2 | G1 | 550 | 1380 x 850 x 1150 |
| MCS-18.5D5 | 5 | 73 | 60 | 3.60 | 129 | 18.5 | 25 | 70±2 | G1 | 740 | 1380 x 850 x 1150 |
| MCS-22D5 | 5 | 73 | 83 | 5.00 | 179 | 22 | 30 | 70±2 | G1 1/2 | 850 | 1500 x 1000 x 1320 |
| MCS-30D5 | 5 | 73 | 105 | 6.30 | 225 | 30 | 40 | 70±2 | G1 1/2 | 1200 | 1500 x 1000 x 1320 |
| MCS-37D5 | 5 | 73 | 117 | 7.00 | 250 | 37 | 50 | 72±2 | G1 1/2 | 1300 | 1500 x 1000 x 1320 |
| MCS-45D5 | 5 | 73 | 167 | 10.00 | 357 | 45 | 60 | 72±2 | G2 | 1450 | 1900 x 1250 x 1600 |
| MCS-55D5 | 5 | 73 | 217 | 13.00 | 464 | 55 | 75 | 72±2 | G2 | 2150 | 2000 x 1250 x 1670 |
| MCS-75D5 | 5 | 73 | 267 | 16.00 | 571 | 75 | 100 | 74±2 | G21/2 | 2360 | 2000 x 1250 x 1670 |
| MCS-90D5 | 5 | 73 | 343 | 20.60 | 736 | 90 | 120 | 74±2 | G21/2 | 2360 | 2500 x 1470 x 1840 |
| MCS-110D5 | 5 | 73 | 410 | 24.60 | 879 | 110 | 150 | 76±2 | G21/2 | 2360 | 2500 x 1470 x 1840 |
| MCS-132D5 | 5 | 73 | 473 | 28.40 | 1014 | 132 | 175 | 76±2 | DN100 | 3100 | 2500 x 1470 x 1840 |
| MCS-160D5 | 5 | 73 | 550 | 33.00 | 1179 | 160 | 220 | 78±2 | DN100 | 3100 | 3000 x 1700 x 1950 |
| MCS-185D5 | 5 | 73 | 610 | 36.60 | 1307 | 185 | 250 | 78±2 | DN125 | 4150 | 3000 x 1700 x 1950 |
| MCS-200D5 | 5 | 73 | 703 | 42.20 | 1507 | 200 | 270 | 80±2 | DN125 | 4300 | 3200 x1980 x 2150 |
| MCS-220D5 | 5 | 73 | 850 | 51.00 | 1821 | 220 | 300 | 80±2 | DN150 | 4300 | 3200 x1980 x 2150 |
advantages
|
1. Easy for Maintenance, Low cost for Maintenance All the pipe and spare parts is standardized, they can be changed fast. 2. 6000sets capacity for each month. As 1 of the largest Air compressor Manufacture, with Advanced Automatic Production Line, 6000set air compressor can be produced for each month. The production cost is greatly reduced by the production scale production. Providing the most cost-effective product for you. 3. Rich experience in compressed air system solution, 1 stop service and provide air compressor system design We can provide one- stop solution. We can not only provide the air compressor, but also high quality air treatment equipment, such as air tank, air dryer, air filter, air pipe, valves and air compressor spare parts. Save your time and cost greatly. 4. Strong R&D Capability Annual Increasing R&D investment. Introduce German GU technology and the Japanese Military technology. Long- term collaborative project with HangZhou Jiaotong University. |
Application
Sales Service
Professional online consultant to solve your question about compressor system.
√ Free site design consultant, and energy saving solution to help you save operation cost.
√ Negotiable technician available to service machinery overseas.
√ Online professional after-service until solve the problem.
√ 1 year warranty after commissioning or 16 months against shipping date, it depends on which 1 come firstly for the whole
machine(except maintenance consumable).
√ A sufficient number of spare parts are available, make sure the good after service.
Certificate
About mikovs
|
Mikovs Compressor
|
RFQ
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor more than 8 years.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwid agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance,
and consider the actual environment.
Q8. How do you control quality ?
A: 1.Raw- material in checking.
2.Assembly.
3.Worldwid after service available.arrange our engineers to help you training and installation.
Q9. Do you offer OEM service ?
A: Yes.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
How Do Gas Air Compressors Compare to Diesel Air Compressors?
When comparing gas air compressors to diesel air compressors, there are several factors to consider, including fuel efficiency, power output, cost, maintenance requirements, and environmental impact. Here’s a detailed explanation of how these two types of air compressors compare:
1. Fuel Efficiency:
Diesel air compressors are generally more fuel-efficient compared to gas air compressors. Diesel engines have higher energy density and better overall efficiency than gasoline engines. This means that diesel compressors can produce more work output per unit of fuel consumed, resulting in lower fuel costs and longer runtimes between refueling.
2. Power Output:
Diesel air compressors typically provide higher power output compared to gas air compressors. Diesel engines are known for their robustness and ability to generate higher torque, making them suitable for heavy-duty applications that require a larger volume of compressed air or higher operating pressures.
3. Cost:
In terms of upfront cost, gas air compressors are generally more affordable compared to diesel air compressors. Gasoline engines and components are typically less expensive than their diesel counterparts. However, it’s important to consider long-term costs, including fuel expenses and maintenance, which can vary depending on factors such as fuel prices and usage patterns.
4. Maintenance Requirements:
Diesel air compressors often require more regular maintenance compared to gas air compressors. This is because diesel engines have additional components such as fuel filters, water separators, and injector systems that need periodic servicing. Gas air compressors, on the other hand, may have simpler maintenance requirements, resulting in reduced maintenance costs and time.
5. Environmental Impact:
When it comes to environmental impact, diesel air compressors produce higher emissions compared to gas air compressors. Diesel engines emit more particulate matter, nitrogen oxides (NOx), and carbon dioxide (CO2) compared to gasoline engines. Gas air compressors, especially those powered by propane, tend to have lower emissions and are considered more environmentally friendly.
6. Portability and Mobility:
Gas air compressors are generally more portable and easier to move compared to diesel air compressors. Gasoline engines are typically lighter and more compact, making gas air compressors suitable for applications where mobility is essential, such as construction sites or remote locations.
It’s important to note that the specific requirements of the application and the availability of fuel sources also play a significant role in choosing between gas air compressors and diesel air compressors. Each type has its own advantages and considerations, and the choice should be based on factors such as the intended usage, operating conditions, budget, and environmental considerations.
In conclusion, gas air compressors are often more affordable, portable, and suitable for lighter applications, while diesel air compressors offer higher power output, fuel efficiency, and durability for heavy-duty operations. Consider the specific needs and factors mentioned above to determine the most appropriate choice for your particular application.
.webp)
Can Gas Air Compressors Be Used for Pneumatic Tools?
Yes, gas air compressors can be used for pneumatic tools. Here’s a detailed explanation:
1. Versatile Power Source:
Gas air compressors, powered by gasoline or diesel engines, provide a portable and versatile power source for operating pneumatic tools. They eliminate the need for electrical power supply, making them suitable for remote locations or construction sites where electricity may not be readily available.
2. High Power Output:
Gas air compressors typically offer higher power output compared to electric compressors of similar size. This high power output enables gas compressors to deliver the necessary air pressure and volume required by pneumatic tools, ensuring optimal tool performance.
3. Mobility and Portability:
Gas air compressors are often designed with mobility and portability in mind. They are compact and equipped with wheels or handles, allowing for easy transportation to different job sites. This mobility is advantageous when using pneumatic tools in various locations or when working in confined spaces.
4. Continuous Operation:
Gas air compressors can provide continuous air supply for pneumatic tools without the need for frequent pauses or recharging. As long as there is an adequate fuel supply, gas compressors can operate for extended periods, allowing uninterrupted use of pneumatic tools for tasks such as drilling, nailing, sanding, or painting.
5. Suitable for High-Demand Applications:
Pneumatic tools used in heavy-duty applications often require a robust air supply to meet their performance requirements. Gas air compressors can generate higher air flow rates and maintain higher operating pressures, making them suitable for high-demand pneumatic tools like jackhammers, impact wrenches, or sandblasters.
6. Flexibility in Compressor Size:
Gas air compressors are available in various sizes and capacities, allowing users to choose the compressor that best matches the air demands of their pneumatic tools. From small portable compressors for light-duty tasks to larger industrial-grade compressors for heavy-duty applications, there is a wide range of options to suit different tool requirements.
7. Reduced Dependency on Electrical Infrastructure:
Using gas air compressors for pneumatic tools reduces reliance on electrical infrastructure. In situations where the electrical power supply is limited, unreliable, or expensive, gas compressors offer a viable alternative, ensuring consistent tool performance without concerns about power availability.
It’s important to note that gas air compressors emit exhaust gases during operation, so proper ventilation is necessary when using them in enclosed spaces to ensure the safety of workers.
In summary, gas air compressors can effectively power pneumatic tools, offering mobility, high power output, continuous operation, and suitability for various applications. They provide a reliable and portable solution for utilizing pneumatic tools in locations where electrical power supply may be limited or unavailable.
.webp)
What Are the Advantages of Using a Gas Air Compressor Over an Electric One?
Using a gas air compressor offers several advantages over an electric air compressor. Gas-powered compressors provide unique benefits in terms of mobility, versatility, power, and convenience. Here’s a detailed explanation of the advantages of using a gas air compressor:
1. Portability and Mobility:
Gas air compressors are typically more portable and mobile compared to electric compressors. They often feature handles, wheels, or trailers, allowing for easy transportation to different locations. This portability is especially advantageous in situations where compressed air is needed at remote job sites, outdoor events, or areas without access to electricity. Gas air compressors can be easily moved and positioned where they are required.
2. Independence from Electricity:
One of the primary advantages of gas air compressors is their independence from electricity. They are powered by gas engines, which means they do not rely on a direct connection to the electrical grid. This makes them suitable for use in areas where electrical power is limited, unreliable, or unavailable. Gas air compressors offer a reliable source of compressed air even in remote locations or during power outages.
3. Versatility in Fuel Options:
Gas air compressors provide versatility in terms of fuel options. They can be powered by various types of combustible gases, including gasoline, diesel, natural gas, or propane. This flexibility allows users to choose the most readily available or cost-effective fuel source based on their specific requirements. It also makes gas compressors adaptable to different environments and fuel availability in various regions.
4. Higher Power Output:
Gas air compressors typically offer higher power output compared to electric compressors. Gas engines can generate more horsepower, allowing gas compressors to deliver greater air pressure and volume. This higher power output is beneficial when operating pneumatic tools or equipment that require a significant amount of compressed air, such as jackhammers, sandblasters, or heavy-duty impact wrenches.
5. Continuous Operation:
Gas air compressors can provide continuous operation without the need for frequent breaks or cooldown periods. Electric compressors may overheat with prolonged use, requiring intermittent rest periods to cool down. Gas compressors, on the other hand, can operate continuously for longer durations without the risk of overheating. This continuous operation capability is particularly advantageous in demanding applications or situations that require extended periods of compressed air usage.
6. Quick Startup and Response:
Gas air compressors offer quick startup and response times. They can be started instantly by simply pulling a cord or pressing a button, whereas electric compressors may require time to power up and reach optimal operating conditions. Gas compressors provide immediate access to compressed air, allowing for efficient and prompt task completion.
7. Durability and Resistance to Voltage Fluctuations:
Gas air compressors are generally more durable and resistant to voltage fluctuations compared to electric compressors. Electric compressors can be affected by voltage drops or surges, which may impact their performance or cause damage. Gas compressors, however, are less susceptible to voltage-related issues, making them reliable in environments where voltage fluctuations are common.
8. Lower Energy Costs:
Gas air compressors can offer lower energy costs compared to electric compressors, depending on the price of the fuel being used. Gasoline or diesel fuel, for example, may be more cost-effective than electricity in certain regions or applications. This cost advantage can result in significant savings over time, especially for high-demand compressed air operations.
Overall, the advantages of using a gas air compressor over an electric one include portability, independence from electricity, fuel versatility, higher power output, continuous operation capability, quick startup and response times, durability, resistance to voltage fluctuations, and potentially lower energy costs. These advantages make gas air compressors a preferred choice in various industries, remote locations, and applications where mobility, power, and reliability are crucial.
editor by CX 2024-01-09
China wholesaler High Performance Low Noise 90kw Fixed Speed Direct Driven Air Cooling Industrial Screw Air Compressor small air compressor
Product Description
Oaliss compressor is 1 of the leading compressor manufacturers in China. With 20 years of manufacturing experience and a team of experienced engineers and managers, CHINAMFG began to establish its own brand by providing high-quality air compressors and compressed air treatment equipment to the market. CHINAMFG has a wide range of products ranging from oil-lubricated and oil-free rotary screw compressors and two-stage compressors. To further enrich the product lines, besides permanent magnet compressors and laser cutting compressors, CHINAMFG could also provide low-pressure and high-pressure compressors, portable air compressors and air treatment equipment.
Oaliss-your very own system provider.
Specification
|
Item |
Description |
|
Condition |
New |
|
Warranty |
1 Year |
|
Applicable Industries |
Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works, Energy & Mining, Food & Beverage Shops, Other, Advertising Company |
|
After Warranty Service |
Spare parts |
|
Local Service Location |
None |
|
Showroom Location |
None |
|
Video outgoing-inspection |
Provided |
|
Machinery Test Report |
Provided |
|
Marketing Type |
New Product 2571 |
|
Place of Origin |
China |
|
Brand Name |
Oaliss |
|
Type |
Air Compressor |
| Compressor type | Max. pressure | Capacity FAD | Motor power | Noise level | Weight | Air outlet | Dimensions (mm) |
| bar(e) | m3/min | kW | dB(A) | kg | LxWxH | ||
| OLS-08A OLS-08AV |
7 | 1.30 | 7.5 | 64 | 184 | G1/2″ | 850x700x920 |
| 8 | 1.2 | 7.5 | 64 | 184 | G1/2″ | 850x700x920 | |
| 10 | 1 | 7.5 | 64 | 184 | G1/2″ | 850x700x920 | |
| 13 | 0.8 | 7.5 | 64 | 184 | G1/2″ | 850x700x920 | |
| OLS-11A OLS-11AV |
7 | 1.7 | 11 | 65 | 278 | G3/4″ | 1080x750x1000 |
| 8 | 1.6 | 11 | 65 | 278 | G3/4″ | 1080x750x1000 | |
| 10 | 1.4 | 11 | 65 | 278 | G3/4″ | 1080x750x1000 | |
| 13 | 1.2 | 11 | 65 | 278 | G3/4″ | 1080x750x1000 | |
| OLS-15A OLS-15AV |
7 | 2.52 | 15 | 66 | 299 | G3/4″ | 1080x750x1000 |
| 8 | 2.4 | 15 | 66 | 299 | G3/4″ | 1080x750x1000 | |
| 10 | 2.1 | 15 | 66 | 299 | G3/4″ | 1080x750x1000 | |
| 13 | 1.7 | 15 | 66 | 299 | G3/4″ | 1080x750x1000 | |
| OLS-18A OLS-18AV |
7 | 3.2 | 18.5 | 67 | 452 | G1″ | 1380x850x1160 |
| 8 | 3.0 | 18.5 | 67 | 452 | G1″ | 1380x850x1160 | |
| 10 | 2.7 | 18.5 | 67 | 452 | G1″ | 1380x850x1160 | |
| 13 | 2.3 | 18.5 | 67 | 452 | G1″ | 1380x850x1160 | |
| OLS-22A OLS-22AV |
7 | 3.7 | 22 | 68 | 467 | G1″ | 1380x850x1160 |
| 8 | 3.6 | 22 | 68 | 467 | G1″ | 1380x850x1160 | |
| 10 | 3.4 | 22 | 68 | 467 | G1″ | 1380x850x1160 | |
| 13 | 2.8 | 22 | 68 | 467 | G1″ | 1380x850x1160 | |
| OLS-30A OLS-30AV |
7 | 5.1 | 30 | 69 | 452 | G1″ | 1230x850x1110 |
| 8 | 5.0 | 30 | 69 | 452 | G1″ | 1230x850x1110 | |
| 10 | 4.9 | 30 | 69 | 452 | G1″ | 1230x850x1110 | |
| 13 | 4.7 | 30 | 69 | 452 | G1″ | 1230x850x1110 | |
| OLS-37A OLS-37AV |
7 | 6.5 | 37 | 69 | 583 | G1 1/2″ | 1340x950x1210 |
| 8 | 6.2 | 37 | 69 | 583 | G1 1/2″ | 1340x950x1210 | |
| 10 | 5.6 | 37 | 69 | 583 | G1 1/2″ | 1340x950x1210 | |
| 13 | 5.0 | 37 | 69 | 583 | G1 1/2″ | 1340x950x1210 | |
| OLS-45A OLS-45AV |
7 | 8.0 | 45 | 70 | 688 | G1 1/2″ | 1500x1000x1300 |
| 8 | 7.7 | 45 | 70 | 688 | G1 1/2″ | 1500x1000x1300 | |
| 10 | 7.0 | 45 | 70 | 688 | G1 1/2″ | 1500x1000x1300 | |
| 13 | 6.7 | 45 | 70 | 688 | G1 1/2″ | 1500x1000x1300 | |
| OLS-55A OLS-55AV |
7 | 10.4 | 55 | 70 | 1055 | G2″ | 1900x1250x1570 |
| 8 | 9.8 | 55 | 70 | 1055 | G2″ | 1900x1250x1570 | |
| 10 | 9.1 | 55 | 70 | 1055 | G2″ | 1900x1250x1570 | |
| 13 | 7.8 | 55 | 70 | 1055 | G2″ | 1900x1250x1570 | |
| OLS-75A OLS-75AV |
7 | 13.6 | 75 | 72 | 1129 | G2″ | 1900x1250x1570 |
| 8 | 13.1 | 75 | 72 | 1129 | G2″ | 1900x1250x1570 | |
| 10 | 11.8 | 75 | 72 | 1129 | G2″ | 1900x1250x1570 | |
| 13 | 9.8 | 75 | 72 | 1129 | G2″ | 1900x1250x1570 | |
| OLS-90A OLS-90AV |
7 | 16.1 | 90 | 73 | 1220 | G2″ | 2000*1250*1680 |
| 8 | 15.5 | 90 | 73 | 1220 | G2″ | 2000*1250*1680 | |
| 10 | 14.8 | 90 | 73 | 1220 | G2″ | 2000*1250*1680 | |
| 13 | 12.5 | 90 | 73 | 1220 | G2″ | 2000*1250*1680 | |
| OLS-110A OLS-110AV |
7 | 21.2 | 110 | 73 | 1970 | G1 1/2″ | 2400x1630x1980 |
| 8 | 19.6 | 110 | 73 | 1970 | G1 1/2″ | 2400x1630x1980 | |
| 10 | 17.8 | 110 | 73 | 1970 | G1 1/2″ | 2400x1630x1980 | |
| 13 | 15.5 | 110 | 73 | 1970 | G1 1/2″ | 2400x1630x1980 | |
| OLS-132A OLS-132AV |
7 | 24.1 | 132 | 73 | 2120 | G1 1/2″ | 2400x1630x1980 |
| 8 | 23.2 | 132 | 73 | 2120 | G1 1/2″ | 2400x1630x1980 | |
| 10 | 19.5 | 132 | 73 | 2120 | G1 1/2″ | 2400x1630x1980 | |
| 13 | 17.8 | 132 | 73 | 2120 | G1 1/2″ | 2400x1630x1980 | |
| OLS-160A OLS-160AV |
7 | 28.8 | 160 | 73 | 3620 | G1 1/2″ | 2800x1820x2150 |
| 8 | 27.8 | 160 | 73 | 3620 | G1 1/2″ | 2800x1820x2150 | |
| 10 | 23 | 160 | 73 | 3620 | G1 1/2″ | 2800x1820x2150 | |
| 13 | 20 | 160 | 73 | 3620 | G1 1/2″ | 2800x1820x2150 | |
| OLS-185A OLS-185AV |
7 | 32.5 | 185 | 74 | 3920 | DN85 | 2800x1820x2150 |
| 8 | 31.2 | 185 | 74 | 3920 | DN85 | 2800x1820x2150 | |
| 10 | 27.5 | 185 | 74 | 3920 | DN85 | 2800x1820x2150 | |
| 13 | 25.8 | 185 | 74 | 3920 | DN85 | 2800x1820x2150 | |
| OLS-200A OLS-200AV |
7 | 36.8 | 220 | 76 | 4800 | DN100 | 3000x1900x1930 |
| 8 | 34.7 | 220 | 76 | 4800 | DN100 | 3000x1900x1930 | |
| 10 | 31.5 | 220 | 76 | 4800 | DN100 | 3000x1900x1930 | |
| 13 | 29.5 | 220 | 76 | 4800 | DN100 | 3000x1900x1930 | |
| OLS-250A OLS-250AV |
7 | 43 | 250 | 76 | 5200 | DN100 | 3000x1900x1930 |
| 8 | 41.5 | 250 | 76 | 5200 | DN100 | 3000x1900x1930 | |
| 10 | 38 | 250 | 76 | 5200 | DN100 | 3000x1900x1930 | |
| 13 | 34.9 | 250 | 76 | 5200 | DN100 | 3000x1900x1930 |
Industrial equipment, printing service, pipelines, power plants, oil&gas, oil refinery, coating, painting,
plastics, steel industry, rubber, mechanical, blow molding, color sorter machine, shipyard, sandblasting,
metallurgy, etc.
To provide the right equipment to you, please send us your detailed requirements.
1 Q: How about the quality of products?
A: We are an authorized distributor of Atlas Copco. Don’t worry about the quality and service.
2 Q: How long is your delivery lead time?
A: If there is stock, the lead time is about 3 working days after we get the payment if need to
be produced, it depends.
3 Q: How about your overseas after-sale service?
A: (1)Provide customers with installation and commissioning online instructions.
(2)Worldwide agents and after service available.
4 Q: Can you accept OEM&ODM orders?
A: Yes, we have a professional design team, OEM&ODM orders are highly welcomed.
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
| Customization: |
Available
|
|
|---|
What are the advantages of using an air compressor in construction?
Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:
- Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
- Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
- Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
- Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
- Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
- Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
- Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.
It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.
In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.
.webp)
How do you choose the right air compressor for woodworking?
Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:
1. Required Air Volume (CFM):
Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.
2. Tank Size:
Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.
3. Maximum Pressure (PSI):
Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.
4. Noise Level:
Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.
5. Portability:
Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.
6. Power Source:
Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.
7. Quality and Reliability:
Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.
8. Budget:
Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.
By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.
.webp)
What is the purpose of an air compressor?
An air compressor serves the purpose of converting power, typically from an electric motor or an engine, into potential energy stored in compressed air. It achieves this by compressing and pressurizing air, which can then be used for various applications. Here’s a detailed explanation of the purpose of an air compressor:
1. Powering Pneumatic Tools: One of the primary uses of an air compressor is to power pneumatic tools. Compressed air can be used to operate a wide range of tools, such as impact wrenches, nail guns, paint sprayers, sanders, and drills. The compressed air provides the necessary force and energy to drive these tools, making them efficient and versatile.
2. Supplying Clean and Dry Air: Air compressors are often used to supply clean and dry compressed air for various industrial processes. Many manufacturing and production operations require a reliable source of compressed air that is free from moisture, oil, and other contaminants. Air compressors equipped with appropriate filters and dryers can deliver high-quality compressed air for applications such as instrumentation, control systems, and pneumatic machinery.
3. Inflating Tires and Sports Equipment: Air compressors are commonly used for inflating tires, whether it’s for vehicles, bicycles, or sports equipment. They provide a convenient and efficient method for quickly filling tires with the required pressure. Air compressors are also used for inflating sports balls, inflatable toys, and other similar items.
4. Operating HVAC Systems: Air compressors play a crucial role in the operation of heating, ventilation, and air conditioning (HVAC) systems. They provide compressed air for controlling and actuating dampers, valves, and actuators in HVAC systems, enabling precise regulation of air flow and temperature.
5. Assisting in Industrial Processes: Compressed air is utilized in various industrial processes. It can be used for air blow-off applications, cleaning and drying parts, powering air-operated machinery, and controlling pneumatic systems. Air compressors provide a reliable and efficient source of compressed air that can be tailored to meet the specific requirements of different industrial applications.
6. Supporting Scuba Diving and Breathing Systems: In scuba diving and other breathing systems, air compressors are responsible for filling diving tanks and supplying breathable air to divers. These compressors are designed to meet strict safety standards and deliver compressed air that is free from contaminants.
Overall, the purpose of an air compressor is to provide a versatile source of compressed air for powering tools, supplying clean air for various applications, inflating tires and sports equipment, supporting industrial processes, and facilitating breathing systems in specific contexts.
editor by CX 2023-10-09
China best CHINAMFG China Electric Direct Driven Rotary Screw Air Compressor air compressor parts
Product Description
XCMG China Electric Direct Driven Rotary Screw Air Compressor
Product Description
Noise enclosure
It is designed into fully-closed mute box, in which sound-absorbing sponge are attached for effective absorption of noise,thereby making the noise 3-5dB(A) lower than that made by the compressors of the same kind.It is reasonably structured overall and very easy to maintain and repair.
Control Panel
Intelligent microcomputer-based control technology can monitor and control in all aspects the complete machine following your instructions. Remote control realizes unattended operation, and the user-friendly human-machine interface displays instructions and parameters in written form. Also, it can function to self diagnose faults,give warning and automatically regulate the capacity.
Motor
First-class motors are adopted, with the level of protection being Ip54 and insulation level being F.overall and very easy to maintain and repair.
Cooler
It is designed for low temperature difference to increase heat exchange area, and ideal to be applied to high-temperature and high-humidity operating environment.
Configuration characteristics
1. A precisely-made central bracket is used to keep the motor aligned permanently with the bare compressor
2. A highly resilient coupling is adopted to make the compressor operate smoothly, and the elastomer is long in useful life
3. The exhaust pipe adopts double-layer bellows, and the oil circuit adopts specially-made temperature-resistant 125º C high-pressure hose
4. For the extremely high temperature condition in some districts, the large-area plate heat exchange and high-efficiency water chiller are used
5. High-quality shaft coupling elastic body can buffer and compensate for the imbalanced moment of operation.
Product Parameters
|
Model |
Air flow |
pressure |
Motor power |
Caliber |
Noise |
Cooling air volume |
Cooling water |
|
m ³/min |
MPa |
kW |
dB(A) |
m ³/min |
L/min |
||
|
LA-7GA |
1.35 |
0.7 |
7.5 |
G1/2 |
62±2 |
32.5 |
|
|
1.25 |
0.8 |
||||||
|
1.01 |
1 |
||||||
|
0.9 |
1.25 |
||||||
|
LA-11GA |
1.8 |
0.7 |
11 |
G3/4 |
63±2 |
50 |
|
|
1.78 |
0.8 |
||||||
|
1.55 |
1 |
||||||
|
1.3 |
1.25 |
||||||
|
LA-15GA |
2.5 |
0.7 |
15 |
G3/4 |
63±2 |
50 |
|
|
2.4 |
0.8 |
||||||
|
2.1 |
1 |
||||||
|
1.8 |
1.25 |
||||||
|
LA-18GA |
3.1 |
0.7 |
18.5 |
G1 |
64±2 |
100 |
|
|
3 |
0.8 |
||||||
|
2.7 |
1 |
||||||
|
2.3 |
1.25 |
||||||
|
LA-22GA/W |
3.8 |
0.7 |
22 |
G1 |
64±2 |
110 |
14.5 |
|
3.7 |
0.8 |
||||||
|
3.2 |
1 |
||||||
|
2.8 |
1.25 |
||||||
|
LA-30GA/W |
5.4 |
0.7 |
30 |
G1 |
65±2 |
145 |
20 |
|
5.25 |
0.8 |
||||||
|
4.5 |
1 |
||||||
|
3.9 |
1.25 |
||||||
|
LA-37GA/W |
6.6 |
0.7 |
37 |
G1 ½ |
65±2 |
145 |
25 |
|
6.6 |
0.8 |
||||||
|
5.9 |
1 |
||||||
|
4.8 |
1.25 |
||||||
|
LA-45GA/W |
8.4 |
0.7 |
45 |
G1 ½ |
66±2 |
185 |
30 |
|
8 |
0.8 |
||||||
|
7.4 |
1 |
||||||
|
6.4 |
1.25 |
||||||
|
LA-55GA/W |
10.8 |
0.7 |
55 |
G2 |
68±2 |
220 |
39.9 |
|
10 |
0.8 |
||||||
|
9.1 |
1 |
||||||
|
8 |
1.25 |
||||||
|
LA-75GA/W |
13.8 |
0.7 |
75 |
G2 |
72±2 |
250 |
51 |
|
13 |
0.8 |
||||||
|
11.8 |
1 |
||||||
|
10.3 |
1.25 |
||||||
|
LA-90GA/W |
17.1 |
0.7 |
90 |
G2 |
72±2 |
270 |
61 |
|
17 |
0.8 |
||||||
|
15.2 |
1 |
||||||
|
12.5 |
1.25 |
||||||
|
LA-110GA/W |
21.2 |
0.7 |
110 |
G2 1/2 |
75±2 |
420 |
79 |
|
20 |
0.8 |
||||||
|
17.1 |
1 |
||||||
|
15.4 |
1.25 |
||||||
|
LA-132GA/W |
25 |
0.7 |
132 |
G2 1/2 |
75±2 |
460 |
91 |
|
24.3 |
0.8 |
||||||
|
21 |
1 |
||||||
|
17.5 |
1.25 |
||||||
|
LA-160GA/W |
30.5 |
0.7 |
160 |
G2 1/2 |
75±2 |
510 |
105 |
|
29.2 |
0.8 |
||||||
|
26.9 |
1 |
||||||
|
22.5 |
1.25 |
||||||
|
LA-185GA/W |
32.9 |
0.7 |
185 |
G2 1/2 |
75±2 |
510 |
123 |
|
31.9 |
0.8 |
||||||
|
29.1 |
1 |
||||||
|
25.5 |
1.25 |
||||||
|
LA-220GA/W |
37 |
0.7 |
220 |
DN80 |
75±2 |
710 |
144 |
|
36.3 |
0.8 |
||||||
|
31.63 |
1 |
||||||
|
28.55 |
1.25 |
||||||
|
LA-250GA/W |
45.8 |
0.7 |
250 |
DN80 |
75±2 |
800 |
163 |
|
44 |
0.8 |
||||||
|
39 |
1 |
||||||
|
35.5 |
1.25 |
Product Picture
Company Profile
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted.
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC.
3: What about the delivery time?
A: 7-30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
| After-sales Service: | Overseas Service Center Available |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Water Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
.webp)
How are air compressors used in the food and beverage industry?
Air compressors play a vital role in the food and beverage industry, providing a reliable source of compressed air for various applications. Here are some common uses of air compressors in this industry:
1. Packaging and Filling:
Air compressors are extensively used in packaging and filling operations in the food and beverage industry. Compressed air is utilized to power pneumatic systems that control the movement and operation of packaging machinery, such as filling machines, capping machines, labeling equipment, and sealing devices. The precise and controlled delivery of compressed air ensures accurate and efficient packaging of products.
2. Cleaning and Sanitization:
Air compressors are employed for cleaning and sanitization purposes in food and beverage processing facilities. Compressed air is used to operate air-powered cleaning equipment, such as air blowguns, air-operated vacuum systems, and air knives. It helps remove debris, dust, and contaminants from production lines, equipment, and hard-to-reach areas. Additionally, compressed air is used for drying surfaces after cleaning and for applying sanitizing agents.
3. Cooling and Refrigeration:
In the food and beverage industry, air compressors are utilized in cooling and refrigeration systems. Compressed air is used to drive air compressors in refrigeration units, enabling the circulation of refrigerants and maintaining optimal temperatures for food storage and preservation. The controlled airflow provided by the compressors facilitates efficient cooling and refrigeration processes.
4. Aeration and Mixing:
Air compressors are used for aeration and mixing applications in the food and beverage industry. Compressed air is introduced into processes such as fermentation, dough mixing, and wastewater treatment. It helps in promoting oxygen transfer, enhancing microbial activity, and facilitating proper mixing of ingredients or substances, contributing to the desired quality and consistency of food and beverage products.
5. Pneumatic Conveying:
In food processing plants, air compressors are employed for pneumatic conveying systems. Compressed air is used to transport bulk materials such as grains, powders, and ingredients through pipes or tubes. It enables the gentle and efficient movement of materials without the need for mechanical conveyors, reducing the risk of product damage or contamination.
6. Quality Control and Testing:
Air compressors are utilized in quality control and testing processes within the food and beverage industry. Compressed air is used for leak testing of packaging materials, containers, and seals to ensure product integrity. It is also employed for spraying air or gases during sensory analysis and flavor testing.
7. Air Agitation:
In certain food and beverage production processes, air compressors are used for air agitation. Compressed air is introduced into tanks, mixing vessels, or fermentation tanks to create turbulence and promote mixing or chemical reactions. It aids in achieving consistent product quality and uniform distribution of ingredients or additives.
It is important to note that air compressors used in the food and beverage industry must meet strict hygiene and safety standards. They may require specific filtration systems, oil-free operation, and compliance with food safety regulations to prevent contamination or product spoilage.
By utilizing air compressors effectively, the food and beverage industry can benefit from improved productivity, enhanced product quality, and efficient processing operations.
.webp)
What is the energy efficiency of modern air compressors?
The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:
Variable Speed Drive (VSD) Technology:
Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.
Air Leakage Reduction:
Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.
Efficient Motor Design:
The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.
Optimized Control Systems:
Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.
Air Storage and Distribution:
Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.
Energy Management and Monitoring:
Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.
It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.
Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.
.webp)
What is the difference between a piston and rotary screw compressor?
Piston compressors and rotary screw compressors are two common types of air compressors with distinct differences in their design and operation. Here’s a detailed explanation of the differences between these two compressor types:
1. Operating Principle:
- Piston Compressors: Piston compressors, also known as reciprocating compressors, use one or more pistons driven by a crankshaft to compress air. The piston moves up and down within a cylinder, creating a vacuum during the intake stroke and compressing the air during the compression stroke.
- Rotary Screw Compressors: Rotary screw compressors utilize two intermeshing screws (rotors) to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads.
2. Compression Method:
- Piston Compressors: Piston compressors achieve compression through a positive displacement process. The air is drawn into the cylinder and compressed as the piston moves back and forth. The compression is intermittent, occurring in discrete cycles.
- Rotary Screw Compressors: Rotary screw compressors also employ a positive displacement method. The compression is continuous as the rotating screws create a continuous flow of air and compress it gradually as it moves along the screw threads.
3. Efficiency:
- Piston Compressors: Piston compressors are known for their high efficiency at lower flow rates and higher pressures. They are well-suited for applications that require intermittent or variable air demand.
- Rotary Screw Compressors: Rotary screw compressors are highly efficient for continuous operation and are designed to handle higher flow rates. They are often used in applications with a constant or steady air demand.
4. Noise Level:
- Piston Compressors: Piston compressors tend to generate more noise during operation due to the reciprocating motion of the pistons and valves.
- Rotary Screw Compressors: Rotary screw compressors are generally quieter in operation compared to piston compressors. The smooth rotation of the screws contributes to reduced noise levels.
5. Maintenance:
- Piston Compressors: Piston compressors typically require more frequent maintenance due to the higher number of moving parts, such as pistons, valves, and rings.
- Rotary Screw Compressors: Rotary screw compressors have fewer moving parts, resulting in lower maintenance requirements. They often have longer service intervals and can operate continuously for extended periods without significant maintenance.
6. Size and Portability:
- Piston Compressors: Piston compressors are available in both smaller portable models and larger stationary units. Portable piston compressors are commonly used in construction, automotive, and DIY applications.
- Rotary Screw Compressors: Rotary screw compressors are typically larger and more suitable for stationary installations in industrial and commercial settings. They are less commonly used in portable applications.
These are some of the key differences between piston compressors and rotary screw compressors. The choice between the two depends on factors such as required flow rate, pressure, duty cycle, efficiency, noise level, maintenance needs, and specific application requirements.
editor by CX 2023-10-04
China best Heavy Duty Offshore/ Onshore Skid Mounted Explosion Proof ATEX Certified Zone 2 Stationary Diesel Engine Direct Driven Rotary Screw Air Compressor for Sale air compressor price
Product Description
| DENAIR hot sale series diesel portable air compressors | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model | Machine | Diesel Engine | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Free Air Delivery | Normal Working | Dimensions | Weight | Manufacturer | Model | Rated | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pressure | (without towbar) | power | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| m3/min | CFM | bar(g) | psig | L*W*H(mm) | kg | KW | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DACY-3.2/8 | 3.40 | 120 | 8 | 116 | 2263*1590*1543 | 9, China Our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China Q3: Warranty terms of your machine? Q4: Will you provide some spare parts of the machines? Q5: How long will you take to arrange production? Q6: Can you accept OEM orders?
Can air compressors be used for cleaning and blowing dust?Yes, air compressors can be effectively used for cleaning and blowing dust in various applications. Here’s how air compressors are utilized for these purposes: 1. Cleaning Machinery and Equipment: Air compressors are commonly used for cleaning machinery and equipment in industries such as manufacturing, automotive, and construction. Compressed air is directed through a nozzle or blowgun attachment to blow away dust, debris, and other contaminants from surfaces, crevices, and hard-to-reach areas. The high-pressure air effectively dislodges and removes accumulated dust, helping to maintain equipment performance and cleanliness. 2. Dusting Surfaces: Air compressors are also employed for dusting surfaces in various settings, including homes, offices, and workshops. The compressed air can be used to blow dust off furniture, shelves, electronic equipment, and other objects. It provides a quick and efficient method of dusting, especially for intricate or delicate items where traditional dusting methods may be challenging. 3. Cleaning HVAC Systems: Air compressors are utilized for cleaning HVAC (Heating, Ventilation, and Air Conditioning) systems. The compressed air can be used to blow dust, dirt, and debris from air ducts, vents, and cooling coils. This helps improve the efficiency and air quality of HVAC systems, preventing the buildup of contaminants that can affect indoor air quality. 4. Blowing Dust in Workshops: In workshops and garages, air compressors are often used to blow dust and debris from workbenches, power tools, and work areas. Compressed air is directed to blow away loose particles and maintain a clean and safe work environment. This is particularly useful in woodworking, metalworking, and other trades where dust and debris can accumulate during the manufacturing or fabrication processes. 5. Cleaning Electronics and Computer Equipment: Air compressors are employed for cleaning electronics and computer equipment. The compressed air is used to blow dust and debris from keyboards, computer cases, circuit boards, and other electronic components. It helps in preventing overheating and maintaining the proper functioning of sensitive electronic devices. 6. Industrial Cleaning Applications: Air compressors find extensive use in industrial cleaning applications. They are employed in industrial settings, such as factories and warehouses, for cleaning large surfaces, production lines, and equipment. Compressed air is directed through specialized cleaning attachments or air-operated cleaning systems to remove dust, dirt, and contaminants efficiently. When using air compressors for cleaning and blowing dust, it is important to follow safety precautions and guidelines. The high-pressure air can cause injury if directed towards the body or sensitive equipment. It is advisable to wear appropriate personal protective equipment, such as safety glasses and gloves, and ensure that the air pressure is regulated to prevent excessive force. Overall, air compressors provide a versatile and effective solution for cleaning and blowing dust in various applications, offering a convenient alternative to traditional cleaning methods.
What are the environmental considerations when using air compressors?When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors: Energy Efficiency: Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint. Air Leakage: Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency. Noise Pollution: Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution. Emissions: While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors. Proper Waste Management: Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact. Sustainable Practices: Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design. By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.
What is the role of air compressor tanks?Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions: 1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air. 2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment. 3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation. 4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air. 5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor. 6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow. Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.
China best Made in China 15kw 20HP 8~10 Bar Electric Direct Driven Industrial Combined Rotary Screw Air Compressor Machine Price with Dryer and Tank 12v air compressorProduct Description
Product Description The combined screw air compressor is assembled by screw air compressor, refrigerated air dryer, air storage tank and precision filter
Company Profile After Sales Service
FAQ Q1: What is the rotor speed for the air end? Q2: What’s your lead time? Q3: Can you offer water cooled air compressor? Q4: What’s the payment term? Q5: Do you accept customized voltage? Q6: What is your warranty for air compressor? Q7: Can you accept OEM orders? Q8: How about your customer service and after-sales service? Q9: Do you have spare parts in stock? Q10: What kind of initial lubrication oil you used in air compressor?
Choose an Air Compressor for Your BusinessThere are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products. Positive displacementPositive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders. Single-stageThe discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal. low noiseLow noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive. China 100 HP 75KW 8 bar Soundless Direct Driven Screw Air Compressor for Metal or Metallurgy Machinery air compressor oilRelevant Industries: Meals & Beverage Factory, Building works , Vitality & Mining | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-30/8G | 0.8 | 30 | 185 | DN65 | 3400 | 2760×1680×1710 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-21/13G | 1.three | 21 | 185 | DN65 | 3400 | 2760×1680×1710 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-30/8GB | 0.eight | 30 | 200 | DN65 | 3400 | 2760×1680×1710 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-22/13GB | 1.3 | 22 | 200 | DN65 | 3400 | 2760×1680×1710 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-35/8G | 0.eight | 35 | 200 | DN80 | 4400 | 3230×1821×2000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-thirty/10G | 1 | 30 | 200 | DN80 | 4400 | 3230×1821×2000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-27/13G | 1.three | 27 | 200 | DN80 | 4400 | 3230×1821×2000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-forty/8G | 0.8 | 40 | 220 | DN100 | 5800 | 3700×2000×2050 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-40/8GB | 0.eight | 40 | 250 | DN100 | 5800 | 3700×2000×2050 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-35/10G | 1 | 35 | 250 | DN100 | 5900 | 3700×2000×2050 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-46/8G | 0.eight | 46 | 250 | DN100 | 6000 | 3700×2000×2050 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-forty/10G | 1 | 40 | 250 | DN100 | 6000 | 3700×2000×2050 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-33/13G | 1.3 | 33 | 250 | DN100 | 6000 | 3700×2000×2050 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-fifty/8GB | 0.eight | 50 | 315 | DN125 | 6400 | 4200×2200×2250 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-55/8G | 0.8 | 55 | 315 | DN125 | 6400 | 4200×2200×2250 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-fifty six/8G | 0.eight | 56 | 315 | DN125 | 6400 | 4200×2200×2250 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-fifty/10G | 1 | 50 | 315 | DN125 | 6400 | 4200×2200×2250 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-65/8G | 0.eight | 65 | 355 | DN125 | 6300 | 4200×2200×2250 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-sixty six/8G | 0.8 | 66 | 355 | DN125 | 6300 | 4200×2200×2250 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LGS-fifty four/10G | 1 | 54 | 355 | DN125 | 6300 | 4200×2200×2250 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
.webp)
| Technical Parameters of CZPT LG oil-lubricated two-phase Screw Compressor | ||||||||||||
| Model | Working Force | Capacity | Power | Outlet | Weight | Dimensions | ||||||
| (Mpa) | (m3/min) | (kW) | (kg) | (mm) | ||||||||
| KLT120-7 | 0.7 | 18.twelve | 90 | DN65 | 2000 | 2260x1440x1680 | ||||||
| KLT120-eight | 0.eight | 17.ninety five | 90 | DN65 | 2000 | 2260x1440x1680 | ||||||
| KLT150-7 | 0.seven | 21.08 | 110 | DN65 | 2290 | 2230x1460x1840 | ||||||
| KLT150-8 | 0.eight | 21.59 | 110 | DN65 | 2290 | 2230x1460x1840 | ||||||
| KLT180-7 | 0.seven | 26.72 | 132 | DN65 | 2350 | 2230x1460x1840 | ||||||
| KLT180-8 | 0.eight | 26.46 | 132 | DN65 | 2350 | 2230x1460x1840 | ||||||
| KLT215-7 | 0.seven | 31.seventy five | 160 | DN80 | 4130 | 3060x1860x2060 | ||||||
| KLT215-8 | 0.8 | 31.forty four | 160 | DN80 | 4130 | 3060x1860x2060 | ||||||
| KLT250-seven | 0.seven | 36.sixty two | 185 | DN80 | 4200 | 3060x1860x2060 | ||||||
| KLT250-8 | 0.eight | 36.26 | 185 | DN80 | 4200 | 3060x1860x2060 | ||||||
| KLT270-seven | 0.seven | 41 | 200 | DN80 | 3930 | 3060x1860x2060 | ||||||
| KLT270-eight | 0.eight | 40.06 | 200 | DN80 | 3930 | 3060x1860x2060 | ||||||
| KLT295-seven | 0.7 | 43.ninety four | 220 | DN100 | 5700 | 3360x2100x2170 | ||||||
| KLT295-eight | 0.8 | 43.fifty one | 220 | DN100 | 5700 | 3360x2100x2170 | ||||||
| KLT335-seven | 0.seven | 49.57 | 250 | DN100 | 5800 | 3360x2100x2170 | ||||||
| KLT335-8 | 0.8 | 49.08 | 250 | DN100 | 5800 | 3360x2100x2170 | ||||||
| KLT375-7 | 0.seven | 55.19 | 280 | DN125 | 7500 | 3660x2260x2365 | ||||||
| KLT375-eight | 0.8 | 54.65 | 280 | DN125 | 7500 | 3660x2260x2365 | ||||||
| KLT420-seven | 0.seven | 62.46 | 315 | DN125 | 7700 | 3660x2260x2365 | ||||||
| KLT420-eight | 0.8 | 61.85 | 315 | DN125 | 7700 | 3660x2260x2365 | ||||||
| KLT475-seven | 0.seven | 70.24 | 355 | DN125 | 7800 | 3660x2260x2365 | ||||||
| KLT475-eight | 0.eight | 69.55 | 355 | DN125 | 7800 | 3660x2260x2365 | ||||||
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by Cx 2023-05-06
China 100 Hp 75Kw Oil Lubricated Direct Driven Industrial Screw Type Air Compressor for Oil and Gas Field with Good quality
Relevant Industries: General Business
Showroom Place: Egypt, Viet Nam, Philippines, Brazil, Indonesia, Pakistan, India, Russia, South Africa, Malaysia, Australia
Condition: New
Kind: Screw
Configuration: Stationary
Electrical power Source: AC Electricity
Lubrication Design: Lubricated
Mute: Sure
Design Quantity: ERC-100SA
Voltage: 220V/230V/380V/400V/415V/440V/460V/600V/Custom-made
Dimension(L*W*H): 2100*1250*1700mm
Bodyweight: 1840Kg
Guarantee: eighteen months
Functioning Force: 7 bar, 8 bar, thirteen bar, ten bar
Air ability: ten.1 – thirteen.6 m3/min
Equipment Check Report: Supplied
Online video outgoing-inspection: Supplied
Advertising Kind: Regular Product
Warranty of core factors: 1.5 several years
Main Elements: PLC, Equipment, Motor, Bearing
Gas Variety: Air
Soon after-sales Support Presented: Engineers accessible to service equipment abroad
Item title: one hundred Hp 75Kw Immediate Pushed Industrial Screw Variety Air Compressor
Cooling Strategy: The two Air / H2o Cooling Accessible
Air stop: GHH / ELANG
Pressure: 7-13bar
OEM / ODM: offered / provided
Shade: Red and White / Customize
Defense quality: IP54 / IP55
Insulation Class: F
Exhaust oil articles: < 3ppm
Packaging Information: Regular exporting packing for a hundred Hp 75Kw Oil Lubricated Direct Driven Industrial Screw Sort Air Compressor for Oil and Gasoline Field.
Port: ZheJiang , any port in China
one hundred Hp 75Kw Oil Lubricated Immediate Driven Industrial Screw Kind Air Compressor for Oil and Gasoline Area Solution Name:a hundred Hp 75Kw Oil Lubricated Immediate Driven Industrial Screw Kind Air Compressor for Oil and Gasoline Field Functioning Strain: 7 – 13bar (one hundred – 181psi) Air Shipping and delivery: ten.1 – 13.6m3/min Motor Power: 75kw / 100hp Type of Driving: Direct Pushed Sort of Cooling:Air Cooling / H2o Cooling Dimension: 2100*1250*1700mm Excess weight: 1840kg Output pipe Diameter: 2″ There are far more parameters underneath.
Benefits
- Massive displacement: Displacement ten% greater than ordinary piston compressor.
- Strength-saving: When compared with piston air compressor, this sequence of models for the new countrywide regular 2 energy efficiency merchandise, superb power conserving.
- Effortless to function: 24 hrs unattended all day function, Diy Four Wheel GO KART KARTING UTV Buggy Disc Brake Rotor Sprocket ATV 114CM Rear Axle free of charge load routinely begin, complete load automatically shut down.
- Strong stability:Beneath long time functioning, displacement and strain stable, no crash phenomenon, minimal failure price.
| Model | Working Pressure | Air Shipping and delivery | Motor Electrical power | Type of Driving | Type of Cooling | Dimension(mm) | Weight(kg) | Output pipe Diameter | ||||||
| psig | bar | cfm | m3/min | kw/hp | L | W | H | |||||||
| ERC-25SA | 100 | 7 | 109.5 | 3.one | 18.5/25 | Immediate driven | Air Cooling/Water Cooling | 1200 | 880 | 1450 | 620 | 1″ | ||
| 116 | eight | 102.four | two.9 | |||||||||||
| one hundred forty five | 10 | 95.3 | 2.7 | |||||||||||
| 181 | 13 | 81.2 | 2.3 | |||||||||||
| ERC-30SA | 100 | seven | 134.2 | 3.8 | 22/thirty | 1380 | 850 | 1150 | 640 | 11/4″ | ||||
| 116 | 8 | 127.1 | three.6 | |||||||||||
| 145 | 10 | 113. | three.2 | |||||||||||
| 181 | 13 | 88.three | two.5 | |||||||||||
| ERC-40SA | 100 | seven | 187.one | 5.three | 30/forty | 1450 | 900 | 1220 | 900 | 11/4″ | ||||
| 116 | 8 | 176.six | 5 | |||||||||||
| 145 | 10 | 151.8 | 4.3 | |||||||||||
| 181 | thirteen | 127.one | three.six | |||||||||||
| ERC-50SA | 100 | seven | 233. | six.six | 37/fifty | 1595 | 1000 | 1365 | 1060 | 11/2″ | ||||
| 116 | 8 | 218.9 | 6.2 | |||||||||||
| a hundred forty five | ten | 201.3 | five.7 | |||||||||||
| 181 | thirteen | 162.4 | four.six | |||||||||||
| ERC-60SA | a hundred | 7 | 282.five | 8 | 45/sixty | 1595 | 1000 | 1450 | 1150 | 11/2″ | ||||
| 116 | eight | 271.9 | 7.seven | |||||||||||
| a hundred forty five | ten | 243.six | 6.9 | |||||||||||
| 181 | thirteen | 211.nine | 6 | |||||||||||
| ERC-75SA | a hundred | 7 | 370.eight | 10.five | 55/75 | 2100 | 1250 | 1700 | 1750 | 2″ | ||||
| 116 | eight | 346. | 9.8 | |||||||||||
| a hundred forty five | ten | 307.2 | eight.7 | |||||||||||
| 181 | 13 | 257.eight | seven.3 | |||||||||||
| ERC-100SA | one hundred | 7 | 480.2 | 13.six | 75/100 | 2100 | 1250 | 1700 | 1840 | 2″ | ||||
| 116 | eight | 459. | thirteen | |||||||||||
| a hundred forty five | 10 | 399. | 11.three | |||||||||||
| 181 | thirteen | 356.6 | ten.1 | |||||||||||
| ERC-120SA | one hundred | 7 | 572. | sixteen.2 | 90/one hundred twenty | 2100 | 1250 | 1700 | 2030 | 2″ | ||||
| 116 | eight | 543.8 | 15.four | |||||||||||
| one hundred forty five | 10 | 466.1 | thirteen.2 | |||||||||||
| 181 | 13 | 395.5 | eleven.2 | |||||||||||
| ERC-150SA | 100 | 7 | 734.4 | 20.eight | 110/a hundred and fifty | 2545 | 1450 | 1900 | 2920 | DN65 | ||||
| 116 | 8 | 688.5 | 19.five | |||||||||||
| 145 | ten | 582.6 | 16.5 | |||||||||||
| 181 | 13 | 483.7 | 13.7 | |||||||||||
| ERC-175SA | a hundred | seven | 847.four | 24 | 132/175 | 2545 | 1450 | 1900 | 3200 | DN65 | ||||
| 116 | 8 | 812.one | 23 | |||||||||||
| a hundred forty five | ten | 706.2 | twenty | |||||||||||
| 181 | thirteen | 547.three | 15.five | |||||||||||
| ERC-200SA | 100 | 7 | 981.6 | 27.8 | 160/two hundred | 2790 | 1550 | 2000 | 3600 | DN65 | ||||
| 116 | eight | 918.1 | 26 | |||||||||||
| a hundred forty five | 10 | 829.eight | 23.five | |||||||||||
| 181 | 13 | 688.5 | 19.five | |||||||||||
| Motor Efficiency Course: Ultraefficient/IE3/IE2 as for each your necessaryMotor Security Class: IP23/IP54/IP55 or as for every your necessaryCertification: CE/ISO9001/TUV/UL/SGS/ASMEVoltage: 380V/3PH/50HZ/60HZ, 220V/3PH/50HZ/60HZ, 400V/3PH/50HZ/60HZ, 440V/3PH/50HZ/60HZ, 415V/3PH/50HZ/60HZ, 230V/3PH/50HZ/60HZ, dual voltage is also ok | ||||||||||||||
| Model | Working Force | Air Supply | Motor Power | Type of Driving | Type of Cooling | Dimension(mm) | Weight(kg) | Output pipe Diameter | ||||||
| psig | bar | cfm | m3/min | kw/hp | L | W | H | |||||||
| ERC-250SA | a hundred | 7 | 1147.six | 32.five | 185/250 | Direct pushed | Air Cooling/H2o Cooling | 2790 | 1550 | 2000 | 3780 | DN65 | ||
| 116 | 8 | 1094.six | 31 | |||||||||||
| 145 | ten | 918.one | 26 | |||||||||||
| 181 | thirteen | 762.7 | 21.six | |||||||||||
| ERC-270SA | 100 | seven | 1218.two | 34.5 | 200/270 | 2850 | 1700 | 2000 | 4400 | DN80 | ||||
| 116 | eight | 1165.two | 33 | |||||||||||
| a hundred forty five | 10 | 988.7 | 28 | |||||||||||
| 181 | 13 | 829.eight | 23.five | |||||||||||
| ERC-300SA | 100 | 7 | 1341.eight | 38 | 220/three hundred | 3150 | 2000 | 2120 | 4930 | DN100 | ||||
| 116 | eight | 1288.8 | 36.5 | |||||||||||
| one hundred forty five | 10 | 1129.9 | 32 | |||||||||||
| 181 | 13 | 953.four | 27 | |||||||||||
| ERC-330SA | a hundred | 7 | 1518.3 | forty three | 250/330 | 3150 | 2000 | 2120 | 5450 | DN100 | ||||
| 116 | eight | 1430.one | 40.5 | |||||||||||
| one hundred forty five | ten | 1288.8 | 36.5 | |||||||||||
| 181 | 13 | 1129.nine | 32 | |||||||||||
| ERC-375SA | a hundred | seven | 1818.five | 51.five | 280/375 | 4000 | 2000 | 2100 | 6150 | DN125 | ||||
| 116 | eight | 1765.5 | fifty | |||||||||||
| 145 | 10 | 1589. | forty five | |||||||||||
| 181 | 13 | 1306.five | 37 | |||||||||||
| ERC-420SA | 100 | seven | 1977.four | fifty six | 315/420 | 4600 | 2300 | 2400 | 7500 | DN125 | ||||
| 116 | eight | 1942.one | fifty five | |||||||||||
| 145 | ten | 1730.two | forty nine | |||||||||||
| 181 | 13 | 1447.seven | 41 | |||||||||||
| ERC-470SA | one hundred | seven | 2259.8 | 64 | 355/470 | 4600 | 2300 | 2400 | 8100 | DN150 | ||||
| 116 | eight | 2189.two | sixty two | |||||||||||
| 145 | ten | 1906.7 | 54 | |||||||||||
| 181 | 13 | 1624.three | 46 | |||||||||||
| ERC-550SA | one hundred | 7 | 2577.6 | 73 | 400/550 | 5000 | 2350 | 2400 | 8400 | DN150 | ||||
| 116 | 8 | 2471.7 | 70 | |||||||||||
| 145 | ten | 2153.nine | 61 | |||||||||||
| 181 | 13 | 1836.1 | 52 | |||||||||||
| ERC-600SA | 100 | 7 | 2860.one | eighty one | 450/600 | 5500 | 2590 | 2800 | 9000 | DN150 | ||||
| 116 | 8 | 2789.5 | 79 | |||||||||||
| 145 | ten | 2471.seven | 70 | |||||||||||
| 181 | thirteen | 2083.three | 59 | |||||||||||
| ERC-670SA | 100 | 7 | 3142.6 | 89 | 500/670 | 5500 | 2590 | 2800 | 9500 | DN200 | ||||
| 116 | 8 | 3072. | 87 | |||||||||||
| one hundred forty five | 10 | 2718.9 | 77 | |||||||||||
| 181 | 13 | 2365.eight | sixty seven | |||||||||||
| ERC-750SA | one hundred | 7 | 3601.six | 102 | 560/750 | 6500 | 2700 | 3000 | 10000 | DN200 | ||||
| 116 | 8 | 3460.four | 98 | |||||||||||
| a hundred forty five | 10 | 3072. | 87 | |||||||||||
| 181 | 13 | 2718.nine | seventy seven | |||||||||||
| Motor Performance Course: Ultraefficient/IE3/IE2 as for each your necessaryMotor Defense Course: IP23/IP54/IP55 or as for each your neededCertification: CE/ISO9001/TUV/UL/SGS/ASMEVoltage: 380V/3PH/50HZ/60HZ, 220V/3PH/50HZ/60HZ, 400V/3PH/50HZ/60HZ, 111 Awning Add-ons Handbook GearBox 440V/3PH/50HZ/60HZ, 415V/3PH/50HZ/60HZ, 230V/3PH/50HZ/60HZ, dual voltage is also ok | ||||||||||||||
Q1: Why client choose us?A: CZPT INDUSTRIAL (ZheJiang ) CO., LTD., with 18 a long time previous heritage, we are specialized in Rotary Screw Air Compressor. Germany Normal and 10years exporting expertise support us won much more than 50 loyal foreign agents. We warmly welcome your tiny demo purchase for high quality or marketplace check.
Q2: Are you a manufacturer or buying and selling organization?A: We are specialist manufacturer with huge present day factory in ZheJiang ,China. Equally OEM & ODM services can be approved.
Q3: What’s your supply time?A: Generally 3 to 7 times, if urgently buy, pls make contact with our sales in progress.
This fall: How extended is your air compressor warranty?A: One particular 12 months for the whole machine and 2 many years for screw air conclude, apart from consumble spare areas.
Q5: How extended could your air compressor be used?A: Usually, far more than ten a long time.
Q6: What is actually payment phrase?A: T/T, L/C, D/P, Western Union, Paypal, Credit score Card, and etc. Also we could take USD, track shoe assy for CZPT excavator EC210B EC210 EC240 EC240B keep track of chain website link EC280 EC290 track change sprocket rollers RMB, Euro and other currency.
Q7: How about your consumer services?A: 24 several hours on-line service available. 48hours difficulty sovled guarantee.
Q8: How about your soon after-product sales provider?A: 1. Give clients with intallation and commissioning on the web directions. 2. Properly-skilled engineers obtainable to abroad provider. 3. CZPT brokers and soon after service avaiable.
How to Choose the Right Air Compressor
An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
Electric motor
While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
Oil bath
Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.
Start/stop control
An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
Variable speed drive
A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.
editor by Cx 2023-04-28
China 100cfm Dryer 10 Bar Portable Screw Air Compressor Diesel Engine Driven 500 L oil Free Screw Air Compressor arb air compressor
Error:获取session失败，
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by CX 2023-04-27
China 15kw 20HP Rotary AC Power Electric Air Cooled Frequency Inverter Single Stage Belt Driven with Ingersoll Rand Air End Industrial Screw Air Compressors for Sale mini air compressor
Solution Description
ZIQI CZPT Screw Air Compressor Positive aspects:
A.eighty% components of CZPT Compressor undertake world-wide well acknowledged dependable brand name to make sure the air compressor with higher high quality,durable,strength saving:
one.Main part:Germany GHH RAND screw air stop
two.Motor:adopt Brazil WEG brand name,the 2nd largest motor maker in the globe,IE4 power preserving common 3 stage induction motor,IP55 defense
three.Italian EURE oil air vessel ,the direct strain vessel maker in the globe
four.Italian Manuli oil tube
5.French Schneider electric powered method
six.Sweden CZPT bearings
Power saving:
The air compressor equiped the frequency inverter,to make the air compressor with variable pace travel [VSD].The basic principle of VSD is to change the motor rotation velocity routinely in accordance to the genuine air usage. The lowered technique force decreases the complete vitality usage of the entire program, which can reduce vitality costs by 35% or far more.
Specialized Parameter
| Model | Air stress | Max air displacement | Motor power | transmission | dimension | Weight | Noise | Outlet | ||||||
| cooling variety | ||||||||||||||
| mpa | bar(e) | psi(g) | m3/min | cfm | hp | kw | belt push & air cooling |
L(mm) | W(mm) | H(mm) | Kgs | dB(A) | mm | |
| GA-3.7A | .7 | 7 | 102 | .55 | 19 | 5 | 3.7 | 680 | 660 | 780 | 220 | 60±2 | 20 | |
| .8 | eight | 116 | .45 | 16 | ||||||||||
| 1 | ten | a hundred forty five | .35 | 12 | ||||||||||
| GA-5.5A | .7 | seven | 102 | .eight | 28 | 7 | 5.5 | 680 | 660 | 780 | 230 | 61±2 | 20 | |
| .8 | 8 | 116 | .seven | twenty five | ||||||||||
| 1 | ten | 145 | .6 | 21 | ||||||||||
| one.3 | thirteen | 189 | .5 | eighteen | ||||||||||
| GAS-7.5A VFC | .seven | 7 | 102 | 1.3 | forty six | 10 | 7.five | 950 | 650 | 915 | 270 | 62±2 | 20 | |
| .8 | eight | 116 | one.two | forty two | ||||||||||
| one | 10 | a hundred forty five | 1.one | 39 | ||||||||||
| 1.three | 13 | 189 | .nine | 32 | ||||||||||
| GAS-11A VFC | .7 | 7 | 102 | one.eight | 64 | 15 | 11 | 950 | 650 | 915 | 280 | 63±2 | 20 | |
| .eight | 8 | 116 | 1.7 | 60 | ||||||||||
| 1 | ten | 145 | one.five | fifty three | ||||||||||
| 1.three | thirteen | 189 | 1.two | forty two | ||||||||||
| GAS-15A VFC | .7 | 7 | 102 | two.7 | ninety five | 20 | 15 | 1260 | 850 | 1220 | 540 | 66±2 | 25 | |
| .eight | eight | 116 | 2.5 | 88 | ||||||||||
| one | ten | 145 | 2.three | 81 | ||||||||||
| 1.3 | thirteen | 189 | two | 71 | ||||||||||
| GAS-eighteen.5A VFC | .seven | 7 | 102 | three.2 | 113 | 25 | 18.five | 1260 | 850 | 1220 | 550 | 67±2 | 25 | |
| .eight | 8 | 116 | three | 106 | ||||||||||
| one | ten | a hundred forty five | two.8 | ninety nine | ||||||||||
| one.3 | 13 | 189 | 2.4 | 85 | ||||||||||
| GAS-22A VFC | .seven | 7 | 102 | 3.8 | 134 | 30 | 22 | 1260 | 850 | 1220 | 560 | 67±2 | 25 | |
| .eight | 8 | 116 | three.six | 127 | ||||||||||
| 1 | ten | one hundred forty five | three.two | 113 | ||||||||||
| one.3 | thirteen | 189 | 2.eight | 99 | ||||||||||
| GAS-30A VFC | .seven | 7 | 102 | 5.7 | 201 | 40 | 30 | 1500 | 970 | 1375 | 780 | 67±2 | 40 | |
| .eight | 8 | 116 | five.five | 194 | ||||||||||
| 1 | 10 | 145 | 5 | 177 | ||||||||||
| one.3 | 13 | 189 | 4.5 | 159 | ||||||||||
| GAS-37A VFC | .7 | 7 | 102 | 6.eight | 240 | 50 | 37 | 1500 | 970 | 1375 | 800 | 68±2 | 40 | |
| .eight | eight | 116 | six.31 | 222 | ||||||||||
| one | 10 | a hundred forty five | 5.7 | 201 | ||||||||||
| 1.three | thirteen | 189 | 5 | 177 | ||||||||||
| GAS-45A VFC | .7 | seven | 102 | 7.9 | 279 | 60 | 45 | 1500 | 970 | 1375 | 820 | 69±2 | 40 | |
| .8 | eight | 116 | seven.four | 261 | ||||||||||
| 1 | 10 | one hundred forty five | 6.nine | 244 | ||||||||||
| one.3 | 13 | 189 | six.1 | 215 | ||||||||||
| GAS-55A VFC | .seven | 7 | 102 | ten.9 | 385 | 75 | 55 | immediate push &air cooling or water cooling | 2150 | 1326 | 1766 | 1550 | 69±2 | 50 |
| .eight | eight | 116 | 10.4 | 367 | ||||||||||
| one | 10 | a hundred forty five | 9.4 | 332 | ||||||||||
| 1.three | thirteen | 189 | 8.six | 304 | ||||||||||
| GAS-75A VFC | .7 | seven | 102 | 14.five | 512 | 100 | 75 | 2150 | 1326 | 1766 | 1600 | 70±2 | 50 | |
| .8 | 8 | 116 | thirteen.eight | 487 | ||||||||||
| one | 10 | 145 | 12.six | 445 | ||||||||||
| 1.three | thirteen | 189 | 11.2 | 395 | ||||||||||
| GAS-90A VFC | .7 | seven | 102 | 17 | 600 | 120 | 90 | 2545 | 1450 | 1900 | 2500 | 75±2 | 65 | |
| .eight | eight | 116 | 16.five | 583 | ||||||||||
| one | 10 | a hundred forty five | fifteen.2 | 537 | ||||||||||
| 1.three | 13 | 189 | fourteen | 494 | ||||||||||
*For other specifications,make sure you contact the salesman.
Business Details
Packaging & Delivery
FAQ
Are you company?
ZIQI: Indeed,we are skilled air compressor company above 10 several years and our factory situated in ZheJiang .
How lengthy is your air compressor guarantee?
ZIQI: For 1 12 months.
Do you provide Following- income services areas?
ZIQI: Of training course, We could provide easy- consumable spares.
How prolonged could your air compressor be employed?
ZIQI: Normally, far more than ten years.
How about your cost?
ZIQI: Dependent on substantial good quality, Our value is extremely competitive in this market all above the entire world.
How about your client service?
ZIQI: For e-mail, we could reply our customers’ email messages within 2 hrs.
Do you help OEM?
ZIQI: Indeed, and we also offer a number of designs to choose.
How to get quicker quotation?
When you send out us inquiry, make sure you affirm below data at the identical time:
* What is the air displacement (m3/min,cfm/min)?
* What is the air strain (mpa,bar,psi)?
* What is the voltage in your factory (v/p/Hz)?
* It is okay if you want air tank, air dryer and filters.
This details is useful for us to verify ideal products resolution and quotation swiftly.
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 2 Years |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
###
| Customization: |
|---|
###
| Model | Air pressure | Max air displacement | Motor power | transmission | dimension | Weight | Noise | Outlet | ||||||
| cooling type | ||||||||||||||
| mpa | bar(e) | psi(g) | m3/min | cfm | hp | kw | belt drive & air cooling |
L(mm) | W(mm) | H(mm) | Kgs | dB(A) | mm | |
| GA-3.7A | 0.7 | 7 | 102 | 0.55 | 19 | 5 | 3.7 | 680 | 660 | 780 | 220 | 60±2 | 20 | |
| 0.8 | 8 | 116 | 0.45 | 16 | ||||||||||
| 1 | 10 | 145 | 0.35 | 12 | ||||||||||
| GA-5.5A | 0.7 | 7 | 102 | 0.8 | 28 | 7 | 5.5 | 680 | 660 | 780 | 230 | 61±2 | 20 | |
| 0.8 | 8 | 116 | 0.7 | 25 | ||||||||||
| 1 | 10 | 145 | 0.6 | 21 | ||||||||||
| 1.3 | 13 | 189 | 0.5 | 18 | ||||||||||
| GAS-7.5A VFC | 0.7 | 7 | 102 | 1.3 | 46 | 10 | 7.5 | 950 | 650 | 915 | 270 | 62±2 | 20 | |
| 0.8 | 8 | 116 | 1.2 | 42 | ||||||||||
| 1 | 10 | 145 | 1.1 | 39 | ||||||||||
| 1.3 | 13 | 189 | 0.9 | 32 | ||||||||||
| GAS-11A VFC | 0.7 | 7 | 102 | 1.8 | 64 | 15 | 11 | 950 | 650 | 915 | 280 | 63±2 | 20 | |
| 0.8 | 8 | 116 | 1.7 | 60 | ||||||||||
| 1 | 10 | 145 | 1.5 | 53 | ||||||||||
| 1.3 | 13 | 189 | 1.2 | 42 | ||||||||||
| GAS-15A VFC | 0.7 | 7 | 102 | 2.7 | 95 | 20 | 15 | 1260 | 850 | 1220 | 540 | 66±2 | 25 | |
| 0.8 | 8 | 116 | 2.5 | 88 | ||||||||||
| 1 | 10 | 145 | 2.3 | 81 | ||||||||||
| 1.3 | 13 | 189 | 2 | 71 | ||||||||||
| GAS-18.5A VFC | 0.7 | 7 | 102 | 3.2 | 113 | 25 | 18.5 | 1260 | 850 | 1220 | 550 | 67±2 | 25 | |
| 0.8 | 8 | 116 | 3 | 106 | ||||||||||
| 1 | 10 | 145 | 2.8 | 99 | ||||||||||
| 1.3 | 13 | 189 | 2.4 | 85 | ||||||||||
| GAS-22A VFC | 0.7 | 7 | 102 | 3.8 | 134 | 30 | 22 | 1260 | 850 | 1220 | 560 | 67±2 | 25 | |
| 0.8 | 8 | 116 | 3.6 | 127 | ||||||||||
| 1 | 10 | 145 | 3.2 | 113 | ||||||||||
| 1.3 | 13 | 189 | 2.8 | 99 | ||||||||||
| GAS-30A VFC | 0.7 | 7 | 102 | 5.7 | 201 | 40 | 30 | 1500 | 970 | 1375 | 780 | 67±2 | 40 | |
| 0.8 | 8 | 116 | 5.5 | 194 | ||||||||||
| 1 | 10 | 145 | 5 | 177 | ||||||||||
| 1.3 | 13 | 189 | 4.5 | 159 | ||||||||||
| GAS-37A VFC | 0.7 | 7 | 102 | 6.8 | 240 | 50 | 37 | 1500 | 970 | 1375 | 800 | 68±2 | 40 | |
| 0.8 | 8 | 116 | 6.31 | 222 | ||||||||||
| 1 | 10 | 145 | 5.7 | 201 | ||||||||||
| 1.3 | 13 | 189 | 5 | 177 | ||||||||||
| GAS-45A VFC | 0.7 | 7 | 102 | 7.9 | 279 | 60 | 45 | 1500 | 970 | 1375 | 820 | 69±2 | 40 | |
| 0.8 | 8 | 116 | 7.4 | 261 | ||||||||||
| 1 | 10 | 145 | 6.9 | 244 | ||||||||||
| 1.3 | 13 | 189 | 6.1 | 215 | ||||||||||
| GAS-55A VFC | 0.7 | 7 | 102 | 10.9 | 385 | 75 | 55 | direct drive &air cooling or water cooling | 2150 | 1326 | 1766 | 1550 | 69±2 | 50 |
| 0.8 | 8 | 116 | 10.4 | 367 | ||||||||||
| 1 | 10 | 145 | 9.4 | 332 | ||||||||||
| 1.3 | 13 | 189 | 8.6 | 304 | ||||||||||
| GAS-75A VFC | 0.7 | 7 | 102 | 14.5 | 512 | 100 | 75 | 2150 | 1326 | 1766 | 1600 | 70±2 | 50 | |
| 0.8 | 8 | 116 | 13.8 | 487 | ||||||||||
| 1 | 10 | 145 | 12.6 | 445 | ||||||||||
| 1.3 | 13 | 189 | 11.2 | 395 | ||||||||||
| GAS-90A VFC | 0.7 | 7 | 102 | 17 | 600 | 120 | 90 | 2545 | 1450 | 1900 | 2500 | 75±2 | 65 | |
| 0.8 | 8 | 116 | 16.5 | 583 | ||||||||||
| 1 | 10 | 145 | 15.2 | 537 | ||||||||||
| 1.3 | 13 | 189 | 14 | 494 | ||||||||||
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 2 Years |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
###
| Customization: |
|---|
###
| Model | Air pressure | Max air displacement | Motor power | transmission | dimension | Weight | Noise | Outlet | ||||||
| cooling type | ||||||||||||||
| mpa | bar(e) | psi(g) | m3/min | cfm | hp | kw | belt drive & air cooling |
L(mm) | W(mm) | H(mm) | Kgs | dB(A) | mm | |
| GA-3.7A | 0.7 | 7 | 102 | 0.55 | 19 | 5 | 3.7 | 680 | 660 | 780 | 220 | 60±2 | 20 | |
| 0.8 | 8 | 116 | 0.45 | 16 | ||||||||||
| 1 | 10 | 145 | 0.35 | 12 | ||||||||||
| GA-5.5A | 0.7 | 7 | 102 | 0.8 | 28 | 7 | 5.5 | 680 | 660 | 780 | 230 | 61±2 | 20 | |
| 0.8 | 8 | 116 | 0.7 | 25 | ||||||||||
| 1 | 10 | 145 | 0.6 | 21 | ||||||||||
| 1.3 | 13 | 189 | 0.5 | 18 | ||||||||||
| GAS-7.5A VFC | 0.7 | 7 | 102 | 1.3 | 46 | 10 | 7.5 | 950 | 650 | 915 | 270 | 62±2 | 20 | |
| 0.8 | 8 | 116 | 1.2 | 42 | ||||||||||
| 1 | 10 | 145 | 1.1 | 39 | ||||||||||
| 1.3 | 13 | 189 | 0.9 | 32 | ||||||||||
| GAS-11A VFC | 0.7 | 7 | 102 | 1.8 | 64 | 15 | 11 | 950 | 650 | 915 | 280 | 63±2 | 20 | |
| 0.8 | 8 | 116 | 1.7 | 60 | ||||||||||
| 1 | 10 | 145 | 1.5 | 53 | ||||||||||
| 1.3 | 13 | 189 | 1.2 | 42 | ||||||||||
| GAS-15A VFC | 0.7 | 7 | 102 | 2.7 | 95 | 20 | 15 | 1260 | 850 | 1220 | 540 | 66±2 | 25 | |
| 0.8 | 8 | 116 | 2.5 | 88 | ||||||||||
| 1 | 10 | 145 | 2.3 | 81 | ||||||||||
| 1.3 | 13 | 189 | 2 | 71 | ||||||||||
| GAS-18.5A VFC | 0.7 | 7 | 102 | 3.2 | 113 | 25 | 18.5 | 1260 | 850 | 1220 | 550 | 67±2 | 25 | |
| 0.8 | 8 | 116 | 3 | 106 | ||||||||||
| 1 | 10 | 145 | 2.8 | 99 | ||||||||||
| 1.3 | 13 | 189 | 2.4 | 85 | ||||||||||
| GAS-22A VFC | 0.7 | 7 | 102 | 3.8 | 134 | 30 | 22 | 1260 | 850 | 1220 | 560 | 67±2 | 25 | |
| 0.8 | 8 | 116 | 3.6 | 127 | ||||||||||
| 1 | 10 | 145 | 3.2 | 113 | ||||||||||
| 1.3 | 13 | 189 | 2.8 | 99 | ||||||||||
| GAS-30A VFC | 0.7 | 7 | 102 | 5.7 | 201 | 40 | 30 | 1500 | 970 | 1375 | 780 | 67±2 | 40 | |
| 0.8 | 8 | 116 | 5.5 | 194 | ||||||||||
| 1 | 10 | 145 | 5 | 177 | ||||||||||
| 1.3 | 13 | 189 | 4.5 | 159 | ||||||||||
| GAS-37A VFC | 0.7 | 7 | 102 | 6.8 | 240 | 50 | 37 | 1500 | 970 | 1375 | 800 | 68±2 | 40 | |
| 0.8 | 8 | 116 | 6.31 | 222 | ||||||||||
| 1 | 10 | 145 | 5.7 | 201 | ||||||||||
| 1.3 | 13 | 189 | 5 | 177 | ||||||||||
| GAS-45A VFC | 0.7 | 7 | 102 | 7.9 | 279 | 60 | 45 | 1500 | 970 | 1375 | 820 | 69±2 | 40 | |
| 0.8 | 8 | 116 | 7.4 | 261 | ||||||||||
| 1 | 10 | 145 | 6.9 | 244 | ||||||||||
| 1.3 | 13 | 189 | 6.1 | 215 | ||||||||||
| GAS-55A VFC | 0.7 | 7 | 102 | 10.9 | 385 | 75 | 55 | direct drive &air cooling or water cooling | 2150 | 1326 | 1766 | 1550 | 69±2 | 50 |
| 0.8 | 8 | 116 | 10.4 | 367 | ||||||||||
| 1 | 10 | 145 | 9.4 | 332 | ||||||||||
| 1.3 | 13 | 189 | 8.6 | 304 | ||||||||||
| GAS-75A VFC | 0.7 | 7 | 102 | 14.5 | 512 | 100 | 75 | 2150 | 1326 | 1766 | 1600 | 70±2 | 50 | |
| 0.8 | 8 | 116 | 13.8 | 487 | ||||||||||
| 1 | 10 | 145 | 12.6 | 445 | ||||||||||
| 1.3 | 13 | 189 | 11.2 | 395 | ||||||||||
| GAS-90A VFC | 0.7 | 7 | 102 | 17 | 600 | 120 | 90 | 2545 | 1450 | 1900 | 2500 | 75±2 | 65 | |
| 0.8 | 8 | 116 | 16.5 | 583 | ||||||||||
| 1 | 10 | 145 | 15.2 | 537 | ||||||||||
| 1.3 | 13 | 189 | 14 | 494 | ||||||||||
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by CX 2023-03-28
China Linghein Atlas Copco Sub Brand Portable Industrial Belt Driven AC Air End Electric VSD Varaibles High Pressure Made in China Price Rotary Screw Air Compressor with high quality
Item Description
Product Description
Why pick Xihu (West Lake) Dis.in CSTMDD compressor ?
one.Cooling result fan: Admirer motor in lower speed,20%cooling margin,stay away from the large temperature problem.
2.Belt Driven: Optimized design and style for belt driven.
3.Air/Oil Separator:Larger filtration area,exterior design,simple for maintenance.
4.PLC Controllerm: Clever and smart,with the file remind operate,EN/CH 2 language can be picked.
Atlas-copco group AIR-Stop
* Greater level configuration
* C43 skilled large effectiveness air-end
Atlas Copco freshly released air-conclude in 2571, imported from Belgium
Power and performance of the air-stop enhanced 9% than previous style S40
Substantial performance MOTOR
* Higher degree configuration
* Greater Protection Degree IP54 Motor
Water-proof and dust-evidence
Far more strength-saving(Get CS-7.5N as an illustration)
| Model | Max Doing work Force |
Ability F.A.D | Motor Power |
Transmission | Link | N.W | Dimension (Lx W x H) |
||
| — | bar | psig | m3/min | hp | kw | — | — | kgs | mm |
| CS4N-eight | 8 | 116 | .51 | 5.5 | 4 | Belt Push | G1/2” | 130 | 650*650*890 |
| CS4N-10 | ten | one hundred forty five | .46 | ||||||
| CST4N-eight | eight | 116 | .51 | 5.5 | 4 | Belt Push | G1/2” | 274 | 1547*650*1473 |
| CST4N-10 | 10 | one hundred forty five | .46 | ||||||
| CS5.5N-8 | 8 | 116 | .80 | 7.5 | 5.5 | Belt Generate | G1/2” | 160 | 650*650*890 |
| CS5.5N-ten | ten | a hundred forty five | .65 | ||||||
| CST5.5N-8 | 8 | 116 | .80 | 7.5 | 5.5 | Belt Drive | G1/2” | 304 | 1547*650*1473 |
| CST5.5N-ten | 10 | 145 | .65 | ||||||
| CS7.5N-eight | eight | 116 | 1.05 | 10 | 7.5 | Belt Travel | G1/2” | 167 | 650*650*890 |
| CS7.5N-10 | 10 | 145 | .85 | ||||||
| CST7.5N-eight | eight | 116 | 1.05 | 10 | 7.five | Belt Push | G1/2” | 311 | 1547*650*1473 |
| CST7.5N-10 | ten | a hundred forty five | .85 | ||||||
| CS7.5N TMDD-eight | eight | 116 | one.05 | 10 | 7.five | Belt Travel | G1/2” | 358 | 1547*650*1473 |
| CS7.5N TMDD-ten | ten | one hundred forty five | .85 | ||||||
| CS11N-seven | 7 | 102 | one.65 | 15 | 11 | Belt Drive | G3/4″ | 230 | 850*650*930 |
| CS11N-8 | eight | 116 | one.64 | ||||||
| CS11N-ten | 10 | 145 | one.35 | ||||||
| CS15N-seven | seven | 102 | 2.00 | 20 | 15 | Belt Drive | G3/4″ | 230 | 850*650*930 |
| CS15N-8 | 8 | 116 | two.00 | ||||||
| CS15N-ten | ten | a hundred forty five | one.80 | ||||||
| CS18.5N-seven | seven | 102 | three.00 | 25 | 18.5 | Belt Drive | G1″ | 330 | 710*740*1275 |
| CS18.5N-eight | 8 | 116 | 2.90 | ||||||
| CS18.5N-10 | 10 | a hundred forty five | two.50 | ||||||
| CS22N-7 | 7 | 102 | three.30 | 30 | 22 | Belt Push | G1″ | 345 | 710*740*1275 |
| CS22N-eight | eight | 116 | three.30 | ||||||
| CS22N-10 | 10 | a hundred forty five | 2.80 | ||||||
| CS30N-7 | seven | 102 | 4.90 | 40 | 30 | Belt Generate | G1″ | 490 | 860*850*1345 |
| CS30N-eight | 8 | 116 | 4.70 | ||||||
| CS30N-10 | 10 | a hundred forty five | three.80 | ||||||
| CS37N-7 | seven | 102 | 5.80 | 50 | 37 | Belt Generate | G1″ | 524 | 860*850*1345 |
| CS37N-eight | 8 | 116 | five.70 | ||||||
| CS37N-10 | 10 | a hundred forty five | 5.00 | ||||||
| CS45N-7 | 7 | 102 | seven.10 | 60 | 45 | Belt Generate | G1 1/2″ | 650 | 1320*970*1380 |
| CS45N-eight | 8 | 116 | 6.80 | ||||||
| CS45N-ten | ten | 145 | six.00 | ||||||
| CS55N-7 | 7 | 102 | 9.40 | 75 | 55 | Belt Generate | RP2″ | 880 | 1320*1160*1720 |
| CS55N-eight | eight | 116 | eight.90 | ||||||
| CS55N-10 | ten | one hundred forty five | seven.50 | ||||||
| CS75N-7 | seven | 102 | thirteen.00 | 100 | 75 | Belt Drive | RP2″ | 1110 | 1575*1160*1720 |
| CS75N-eight | eight | 116 | eleven.60 | ||||||
| CS75N-10 | ten | one hundred forty five | ten.50 | ||||||
FAQ
Q1: Are you a maker or buying and selling firm?
A1: Xihu (West Lake) Dis.in is expert screw air compressor manufacturing facility found in HangZhou, China, Olymtech is Xihu (West Lake) Dis.in overseas market place sales representative.
Q2: Xihu (West Lake) Dis.in is true member of Atlas-copco team?
A2: Of course, in 2571, Sweden Atlas-copco one hundred% acquired Xihu (West Lake) Dis.in.
Q3: Xihu (West Lake) Dis.in air-end from Atlas-copco?
A3: Sure, Xihu (West Lake) Dis.in LS/LSV, LOH, LSH and CS series air compressors all use Atlas Copco’s air-end.
This autumn: What’s your delivery time?
A4: about 10-20days following you validate the get, other voltage pls get in touch with with us.
Q5: How prolonged is your air compressor guarantee?
A5: One yr for the whole machine since go away our factory.
Q6: What is actually the payment term?
A6:We settle for T/T, LC at sight, Paypal and many others.
Also we accept USD, RMB, JPY, EUR, HKD, GBP, CHF, KRW.
Q7: What is the Min. Get requirement?
A7: 1unit
Q8: What service you can assistance?
A8: We supply right after-income services, custom service, manufacturing look at support and one-quit services.
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
###
| Samples: |
US$ 1300/Unit
1 Unit(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Max Working Pressure |
CAPACITY F.A.D | Motor Power |
Transmission | Connection | N.W | Dimension (Lx W x H) |
||
| — | bar | psig | m3/min | hp | kw | — | — | kgs | mm |
| CS4N-8 | 8 | 116 | 0.51 | 5.5 | 4 | Belt Drive | G1/2” | 130 | 650*650*890 |
| CS4N-10 | 10 | 145 | 0.46 | ||||||
| CST4N-8 | 8 | 116 | 0.51 | 5.5 | 4 | Belt Drive | G1/2” | 274 | 1547*650*1473 |
| CST4N-10 | 10 | 145 | 0.46 | ||||||
| CS5.5N-8 | 8 | 116 | 0.80 | 7.5 | 5.5 | Belt Drive | G1/2” | 160 | 650*650*890 |
| CS5.5N-10 | 10 | 145 | 0.65 | ||||||
| CST5.5N-8 | 8 | 116 | 0.80 | 7.5 | 5.5 | Belt Drive | G1/2” | 304 | 1547*650*1473 |
| CST5.5N-10 | 10 | 145 | 0.65 | ||||||
| CS7.5N-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2” | 167 | 650*650*890 |
| CS7.5N-10 | 10 | 145 | 0.85 | ||||||
| CST7.5N-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2” | 311 | 1547*650*1473 |
| CST7.5N-10 | 10 | 145 | 0.85 | ||||||
| CS7.5N TMDD-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2” | 358 | 1547*650*1473 |
| CS7.5N TMDD-10 | 10 | 145 | 0.85 | ||||||
| CS11N-7 | 7 | 102 | 1.65 | 15 | 11 | Belt Drive | G3/4" | 230 | 850*650*930 |
| CS11N-8 | 8 | 116 | 1.64 | ||||||
| CS11N-10 | 10 | 145 | 1.35 | ||||||
| CS15N-7 | 7 | 102 | 2.00 | 20 | 15 | Belt Drive | G3/4" | 230 | 850*650*930 |
| CS15N-8 | 8 | 116 | 2.00 | ||||||
| CS15N-10 | 10 | 145 | 1.80 | ||||||
| CS18.5N-7 | 7 | 102 | 3.00 | 25 | 18.5 | Belt Drive | G1" | 330 | 710*740*1275 |
| CS18.5N-8 | 8 | 116 | 2.90 | ||||||
| CS18.5N-10 | 10 | 145 | 2.50 | ||||||
| CS22N-7 | 7 | 102 | 3.30 | 30 | 22 | Belt Drive | G1" | 345 | 710*740*1275 |
| CS22N-8 | 8 | 116 | 3.30 | ||||||
| CS22N-10 | 10 | 145 | 2.80 | ||||||
| CS30N-7 | 7 | 102 | 4.90 | 40 | 30 | Belt Drive | G1" | 490 | 860*850*1345 |
| CS30N-8 | 8 | 116 | 4.70 | ||||||
| CS30N-10 | 10 | 145 | 3.80 | ||||||
| CS37N-7 | 7 | 102 | 5.80 | 50 | 37 | Belt Drive | G1" | 524 | 860*850*1345 |
| CS37N-8 | 8 | 116 | 5.70 | ||||||
| CS37N-10 | 10 | 145 | 5.00 | ||||||
| CS45N-7 | 7 | 102 | 7.10 | 60 | 45 | Belt Drive | G1 1/2" | 650 | 1320*970*1380 |
| CS45N-8 | 8 | 116 | 6.80 | ||||||
| CS45N-10 | 10 | 145 | 6.00 | ||||||
| CS55N-7 | 7 | 102 | 9.40 | 75 | 55 | Belt Drive | RP2" | 880 | 1320*1160*1720 |
| CS55N-8 | 8 | 116 | 8.90 | ||||||
| CS55N-10 | 10 | 145 | 7.50 | ||||||
| CS75N-7 | 7 | 102 | 13.00 | 100 | 75 | Belt Drive | RP2" | 1110 | 1575*1160*1720 |
| CS75N-8 | 8 | 116 | 11.60 | ||||||
| CS75N-10 | 10 | 145 | 10.50 | ||||||
| Lubrication Style: | Lubricated |
|---|---|
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Structure Type: | Closed Type |
| Installation Type: | Stationary Type |
###
| Samples: |
US$ 1300/Unit
1 Unit(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | Max Working Pressure |
CAPACITY F.A.D | Motor Power |
Transmission | Connection | N.W | Dimension (Lx W x H) |
||
| — | bar | psig | m3/min | hp | kw | — | — | kgs | mm |
| CS4N-8 | 8 | 116 | 0.51 | 5.5 | 4 | Belt Drive | G1/2” | 130 | 650*650*890 |
| CS4N-10 | 10 | 145 | 0.46 | ||||||
| CST4N-8 | 8 | 116 | 0.51 | 5.5 | 4 | Belt Drive | G1/2” | 274 | 1547*650*1473 |
| CST4N-10 | 10 | 145 | 0.46 | ||||||
| CS5.5N-8 | 8 | 116 | 0.80 | 7.5 | 5.5 | Belt Drive | G1/2” | 160 | 650*650*890 |
| CS5.5N-10 | 10 | 145 | 0.65 | ||||||
| CST5.5N-8 | 8 | 116 | 0.80 | 7.5 | 5.5 | Belt Drive | G1/2” | 304 | 1547*650*1473 |
| CST5.5N-10 | 10 | 145 | 0.65 | ||||||
| CS7.5N-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2” | 167 | 650*650*890 |
| CS7.5N-10 | 10 | 145 | 0.85 | ||||||
| CST7.5N-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2” | 311 | 1547*650*1473 |
| CST7.5N-10 | 10 | 145 | 0.85 | ||||||
| CS7.5N TMDD-8 | 8 | 116 | 1.05 | 10 | 7.5 | Belt Drive | G1/2” | 358 | 1547*650*1473 |
| CS7.5N TMDD-10 | 10 | 145 | 0.85 | ||||||
| CS11N-7 | 7 | 102 | 1.65 | 15 | 11 | Belt Drive | G3/4" | 230 | 850*650*930 |
| CS11N-8 | 8 | 116 | 1.64 | ||||||
| CS11N-10 | 10 | 145 | 1.35 | ||||||
| CS15N-7 | 7 | 102 | 2.00 | 20 | 15 | Belt Drive | G3/4" | 230 | 850*650*930 |
| CS15N-8 | 8 | 116 | 2.00 | ||||||
| CS15N-10 | 10 | 145 | 1.80 | ||||||
| CS18.5N-7 | 7 | 102 | 3.00 | 25 | 18.5 | Belt Drive | G1" | 330 | 710*740*1275 |
| CS18.5N-8 | 8 | 116 | 2.90 | ||||||
| CS18.5N-10 | 10 | 145 | 2.50 | ||||||
| CS22N-7 | 7 | 102 | 3.30 | 30 | 22 | Belt Drive | G1" | 345 | 710*740*1275 |
| CS22N-8 | 8 | 116 | 3.30 | ||||||
| CS22N-10 | 10 | 145 | 2.80 | ||||||
| CS30N-7 | 7 | 102 | 4.90 | 40 | 30 | Belt Drive | G1" | 490 | 860*850*1345 |
| CS30N-8 | 8 | 116 | 4.70 | ||||||
| CS30N-10 | 10 | 145 | 3.80 | ||||||
| CS37N-7 | 7 | 102 | 5.80 | 50 | 37 | Belt Drive | G1" | 524 | 860*850*1345 |
| CS37N-8 | 8 | 116 | 5.70 | ||||||
| CS37N-10 | 10 | 145 | 5.00 | ||||||
| CS45N-7 | 7 | 102 | 7.10 | 60 | 45 | Belt Drive | G1 1/2" | 650 | 1320*970*1380 |
| CS45N-8 | 8 | 116 | 6.80 | ||||||
| CS45N-10 | 10 | 145 | 6.00 | ||||||
| CS55N-7 | 7 | 102 | 9.40 | 75 | 55 | Belt Drive | RP2" | 880 | 1320*1160*1720 |
| CS55N-8 | 8 | 116 | 8.90 | ||||||
| CS55N-10 | 10 | 145 | 7.50 | ||||||
| CS75N-7 | 7 | 102 | 13.00 | 100 | 75 | Belt Drive | RP2" | 1110 | 1575*1160*1720 |
| CS75N-8 | 8 | 116 | 11.60 | ||||||
| CS75N-10 | 10 | 145 | 10.50 | ||||||
What to Look For When Buying an Air Compressor
An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
Single-stage air compressors are quieter
When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over three thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
Two-stage air compressors are more energy efficient
Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have two pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.
Piston-driven air compressors are quieter
A piston-driven air compressor is one of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The two main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the two types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
Oil-lubricated air compressors are more cost-effective
There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose one with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which one is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.
editor by czh 2022-12-16